Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Why HVAC maintenance is important for your home

ENERGY STAR advises a yearly check-up by a contractor, timed before the cooling and heating seasons, to keep both systems at peak performance (ENERGY STAR). The same source says a dirty filter can push energy costs higher and can lead to early equipment failure (ENERGY STAR). It suggests checking cooling in spring and heating in fall (ENERGY STAR).

A typical check-up looks at thermostat settings, electrical connections, coils, refrigerant, condensate drains and gas or oil connections (ENERGY STAR). ENERGY STAR's list of actions to do yourself names the air filter (ENERGY STAR). Gas, oil, combustion and electrical work belongs with a licensed contractor.

Why a maintenance visit matters

For cooling and heating systems, ENERGY STAR recommends a contractor-led check-up each year, done ahead of each season (ENERGY STAR). The source compares the benefit to a car tune-up: a yearly service of a heating and cooling system can improve its efficiency and comfort, much as a tune-up can improve a car's gas mileage (ENERGY STAR).

A typical check-up includes lubricating moving parts, checking the controls and checking the starting cycle (ENERGY STAR).

Heating and cooling accounts for almost half of a household's energy use (ENERGY STAR).

When to schedule the check

ENERGY STAR observes that contractors get busy as summer and winter arrive, so it suggests checking cooling in spring and heating in fall (ENERGY STAR).

To help remember, a homeowner might plan the check-ups around the spring and fall time changes (ENERGY STAR).

Filters and airflow

For a central air conditioner, furnace or heat pump, ENERGY STAR calls for a monthly look at the air filter, which may mean inspecting, cleaning or replacing it (ENERGY STAR). The same source notes that a contractor can demonstrate the filter check (ENERGY STAR).

ENERGY STAR says a dirty filter can push energy costs higher, and it can also damage equipment and bring on early failure (ENERGY STAR). Airflow suffers with a dirty filter, so the equipment has to labor harder to warm or cool the house, which wastes energy (ENERGY STAR).

ENERGY STAR says a clean filter also stops dust and dirt from settling in the system, which leads to costly maintenance and/or early system failure (ENERGY STAR). It says to change a filter that looks dirty after a month, and at a minimum every 3 months (ENERGY STAR).

Ducts that carry air for a forced air furnace, a central air conditioner or a heat pump are often big energy wasters (ENERGY STAR). Sealing the ducts in the attic, crawlspace, unheated basement or garage comes first, using mastic or metal-backed foil tape on the seams and connections (ENERGY STAR).

Coils, refrigerant and drains

When coils are dirty, the system tends to run longer, which increases energy costs and reduces how long the equipment lasts (ENERGY STAR). Dirty coils also weaken the unit's cooling capacity (ENERGY STAR). The point applies to both the evaporator coil and the condenser coil (ENERGY STAR).

A contractor checks the refrigerant level in a central air conditioner and adjusts it if needed (ENERGY STAR). Refrigerant that is too high or too low lowers efficiency, and it also raises energy costs and shortens equipment life (ENERGY STAR).

A blocked drain can lead to water damage in the house and shift indoor humidity (ENERGY STAR). The drain check is listed for a central air conditioner, a furnace or a heat pump, with the cooling-mode condition noted (ENERGY STAR).

Electrical connections and motors

Faulty electrical connections can make a system unsafe to run and shorten the service life of its main components (ENERGY STAR). The visit includes tightening electrical connections and checking motor voltage and current (ENERGY STAR).

Parts without lubrication create friction in motors, which increases the electricity they use (ENERGY STAR). Lubricating moving parts is one of the listed check-up tasks (ENERGY STAR).

Gas and oil equipment

A dirty burner, or a cracked heat exchanger, can cause the burner to operate improperly (ENERGY STAR). Either problem can make the equipment less safe and less efficient to run (ENERGY STAR).

ENERGY STAR calls improperly operating gas or oil connections "a fire hazard" that can also add to health problems (ENERGY STAR).

For a gas or oil furnace, follow the manufacturer's manual for the steps an owner can take, and bring in a licensed contractor for any burner, heat exchanger or connection work.

Thermostat settings

Thermostat settings serve two goals: comfort when you are home and energy savings while you are away (ENERGY STAR). A contractor's visit checks those settings, along with the system's controls and start-up cycle (ENERGY STAR).

Equipment age and evaluation

ENERGY STAR advises that HVAC equipment more than 10 years old be evaluated by a professional HVAC contractor (ENERGY STAR). Equipment that is not keeping the house comfortable also calls for that evaluation, the source says (ENERGY STAR).

ENERGY STAR suggests considering a replacement with an ENERGY STAR certified unit when equipment is not performing efficiently or needs an upgrade (ENERGY STAR). Sometimes the big air leaks in the house and the duct system, rather than the equipment, are the real sources of problems (ENERGY STAR). Before buying new equipment, make sure those have been addressed.

New equipment must also be properly installed, since improper installation can reduce system efficiency and possibly shorten the equipment's life (ENERGY STAR).

Frequently asked

Why is HVAC maintenance important?

The source says maintenance is meant to head off future problems and unwanted costs (ENERGY STAR). Dirty coils, a plugged condensate drain and faulty electrical connections are all named as sources of trouble (ENERGY STAR).

When should a cooling system and a heating system be checked?

ENERGY STAR suggests checking the cooling system in spring and the heating system in fall (ENERGY STAR). The same source notes that contractors get busy as summer and winter approach (ENERGY STAR).

Can a dirty air conditioner coil waste energy?

ENERGY STAR says a dirty coil keeps the system running longer and pushes energy costs up (ENERGY STAR). The same source says it also shortens the equipment's life (ENERGY STAR).

Does a clogged condensate drain matter?

ENERGY STAR links a plugged condensate drain to water damage and to changes in indoor humidity (ENERGY STAR).

When should older heating and cooling equipment be evaluated?

ENERGY STAR advises a professional evaluation for equipment more than 10 years old (ENERGY STAR). Discomfort is also a trigger for that evaluation (ENERGY STAR).

Do I need to call a pro for this?

Maybe. For cooling and heating systems, ENERGY STAR recommends a contractor-led check-up each year, done ahead of each season (ENERGY STAR). For a central air conditioner, furnace or heat pump, ENERGY STAR calls for a monthly look at the air filter, which may mean inspecting, cleaning or replacing it (ENERGY STAR). Airflow suffers with a dirty filter, so the equipment has to labor harder to warm or cool the house, which wastes energy (ENERGY STAR). ENERGY STAR observes that contractors get busy as summer and winter arrive, so it suggests checking cooling in spring and heating in fall (ENERGY STAR).

Related

Need an HVAC check for your Florida home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Last updated: 2026-11-21

Sources: ENERGY STAR — How to Maintain Your System (https://www.energystar.gov/saveathome/heating-cooling/maintenance-checklist) · ENERGY STAR — Heat & Cool Efficiently (https://www.energystar.gov/saveathome/heating-cooling)

Search Google for why hvac maintenance is important