Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Should you run a dehumidifier in the winter?

ENERGY STAR says frost can gather on the condensing coils when the air falls under 65 degrees F (ENERGY STAR). If a space typically drops under that, ENERGY STAR says you may want to think about a model rated for cooler air (ENERGY STAR).

Room temperature, humidity ranges, and the choice between portable and whole-home units are the points to weigh for a dehumidifier in cooler months.

Why cold air matters for a dehumidifier

Frost may make the compressor cycle on and off repeatedly, and while that happens the unit is not removing moisture from the air (ENERGY STAR).

ENERGY STAR says that if this cycling happens, the unit should be "switched off and allowed to defrost before it is turned back on" (ENERGY STAR).

Some models include an anti-frost sensor that turns the unit off when the air drops below a certain point (ENERGY STAR).

For a space that typically falls below 65 degrees F, ENERGY STAR notes that a unit specified for lower temperatures may be worth buying (ENERGY STAR).

What humidity level to aim for

ENERGY STAR calls the optimum range for a building one where relative humidity sits generally between 30 and 50 percent (ENERGY STAR, read November 2026). It also says anything above that range may promote mold growth (ENERGY STAR).

EPA advises keeping indoor humidity below 60 percent where possible, and ideally at a level between 30 and 50 percent relative humidity (EPA, read November 2026).

EPA notes that condensation can be one sign of high humidity (EPA).

Window condensation in colder climates

For colder climates, ENERGY STAR gives 30 to 40 percent relative humidity for the heating season as a range to help prevent window condensation (ENERGY STAR, read November 2026).

When condensation or moisture gathers on windows, walls or pipes, EPA advises quick action to dry the surface and cut the source of the moisture or water (EPA).

Running the unit well

Most portable units discharge air from the top and can sit against a wall (ENERGY STAR). Without top discharge, keep the unit away from walls and furniture so air moves freely around it (ENERGY STAR).

ENERGY STAR says that once the room reaches the desired relative humidity, the unit cycles on and off by itself to hold that level (ENERGY STAR).

Every ENERGY STAR dehumidifier has a built-in humidistat, a control that lets you set the relative humidity you want (ENERGY STAR).

Keep the unit clear of dust and dirt sources, which can clog the coils and grills (ENERGY STAR). Heed the maker's electrical safety warnings, keep water drainage and disposal away from electrical circuits or devices, and route any drain hose clear of electrical cords and connections (ENERGY STAR).

Energy use of certified models

Compared with a conventional unit of similar size, a certified one uses 20 percent less energy to pull the same amount of water from the air (ENERGY STAR, read November 2026).

ENERGY STAR measures efficiency with an integrated energy factor, expressed as liters of water removed for each kilowatt-hour used, and a higher number generally means a more efficient unit (ENERGY STAR).

The capacity you need depends on the size of the space and the conditions in it without dehumidification (ENERGY STAR). Capacity is usually expressed in pints per 24 hours, and ENERGY STAR advises that oversizing is preferable to undersizing (ENERGY STAR).

Whole-home units in humid climates

ENERGY STAR points to a certified whole-home dehumidifier as one option for homes in humid areas that already have central air conditioning (ENERGY STAR).

When sized and installed properly, whole-home units can save energy, improve comfort and help prevent mildew and bacterial growth (ENERGY STAR).

Those systems can be costly, ENERGY STAR notes, though it describes their benefits as significant in homes that are relatively well sealed, run central air and show humidity above 55 percent consistently throughout the house (ENERGY STAR, read November 2026).

Whole-home units are typically installed to work with the home's air ducts and are often permanent, while portable units can be moved to where they are needed (ENERGY STAR).

Ask a licensed HVAC contractor to size and install the unit before you buy, and confirm the warranty terms in writing.

ENERGY STAR says sealing the home and its ducts improves performance and lowers the energy use of a whole-home unit (ENERGY STAR).

ENERGY STAR suggests keeping up maintenance on the heating and cooling equipment to help avoid future problems (ENERGY STAR).

Measuring humidity at home

EPA notes that a moisture or humidity meter can measure relative humidity, and these meters are sold at many hardware stores (EPA).

If your unit has no built-in humidistat, or its humidistat does not show RH levels, ENERGY STAR says to consider buying a hygrometer and hanging it near the dehumidifier (ENERGY STAR).

A hygrometer measures RH levels, so you can see when to switch the dehumidifier on or off (ENERGY STAR).

When to call a professional

Blume Mechanical Service repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties.

If you suspect that the HVAC system may be contaminated with mold, EPA says to consult its guide on whether to clean the air ducts before taking further action. EPA also says: "Do not run the HVAC system if you know or suspect that it is contaminated with mold - it could spread mold throughout the building" (EPA).

If frost or repeated cycling keeps happening after you adjust the setting, a licensed HVAC contractor can check the equipment installed in your home.

Frequently asked

Should you run a dehumidifier in the winter?

Below 65 degrees F, ENERGY STAR says frost can gather on the coils (ENERGY STAR). A space that typically falls that low may call for a product specified for lower temperatures, which ENERGY STAR suggests considering (ENERGY STAR).

What humidity should a home be at in winter?

In colder climates, ENERGY STAR's heating-season figure is 30 to 40 percent relative humidity, which helps prevent window condensation (ENERGY STAR, read November 2026). ENERGY STAR says a building's optimum humidity is generally regarded as 30 to 50 percent (ENERGY STAR, read November 2026).

What does condensation on windows mean?

EPA says condensation can point to high humidity (EPA).

Does an ENERGY STAR dehumidifier use less energy?

The ENERGY STAR comparison is 20 percent less energy than a similarly sized conventional unit removing the same moisture (ENERGY STAR, read November 2026).

Should the doors and windows be closed when the dehumidifier runs?

Keep the doors and windows of the space being dehumidified shut while the unit runs (ENERGY STAR).

Do I need to call a pro for this?

Maybe. ENERGY STAR says frost can gather on the condensing coils when the air falls under 65 degrees F (ENERGY STAR). For a space that typically falls below 65 degrees F, ENERGY STAR notes that a unit specified for lower temperatures may be worth buying (ENERGY STAR). ENERGY STAR calls the optimum range for a building one where relative humidity sits generally between 30 and 50 percent (ENERGY STAR, read November 2026).

Related

Need an HVAC check on the equipment in your home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Last updated: 2026-11-21

Sources: ENERGY STAR — Dehumidifiers (https://www.energystar.gov/products/dehumidifiers) · EPA — A Brief Guide to Mold, Moisture, and Your Home (https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home)

Search Google for should you run a dehumidifier in the winter