Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

What an air source heat pump is and how it works

An air source heat pump is a heat pump that moves heat between a home and the outdoor air instead of generating heat itself (Penn State Extension). Almost all air-source and air-to-air units run on electricity (Penn State EGEE 102), and they can heat and cool a space (Penn State EGEE 102). Much like a refrigerator, it uses electric power to shift heat from a colder area into a warmer one, cooling the first and warming the second (Penn State Extension).

Heat is energy that moves between bodies or systems when their temperatures differ (Penn State Extension). A heat pump puts that principle to work by shifting heat from one place to another (Penn State Extension).

What the name means

The air-source label tells you which outside medium the unit trades heat with, namely the air around the building (Penn State Extension). Penn State Extension calls this design the most common variety of heat pump (Penn State Extension). The same source notes that these units combine heating and cooling capabilities (Penn State Extension).

How the refrigerant cycle moves heat

Inside the unit circulates a refrigerant, a specialized fluid that takes up heat (Penn State Extension). Penn State Extension reminds readers that heat moves from hot to cold (Penn State Extension). After the refrigerant takes in heat from outdoor air, ground, or water, it evaporates into a gas (Penn State Extension). A compressor then squeezes that gas, which raises its temperature and pressure (Penn State Extension). The hot, high-pressure gas moves through a condenser, where it gives off heat to an indoor space such as a home or office (Penn State Extension). As it gives off heat, the refrigerant cools and condenses back into a liquid (Penn State Extension). The liquid moves on to an expansion valve, which lowers its pressure and temperature so it is ready to absorb heat again (Penn State Extension). The refrigeration cycle, which is sometimes called a heat pump cycle, moves heat away from the space that is to be cooled (Penn State Extension).

Heating in winter

During cold months, the unit pulls warmth out of outdoor air and sends it into the building (Penn State EGEE 102). Heat pumps move warmth rather than creating it, and they can keep rooms comfortable while running in either heating or cooling mode, with greater efficiency (Penn State Extension). Penn State Extension also says heat pumps can use less energy than traditional heating systems, which can lead to lower energy bills (Penn State Extension).

Cooling in summer

When the weather is hot, the cycle runs in reverse: heat is taken from indoor air and pushed outdoors, which cools the house (Penn State EGEE 102). One unit can heat and cool a building through the seasons, which gives year-round comfort (Penn State Extension). Heat pumps don't burn fossil fuels, and as a result they produce fewer greenhouse gas emissions (Penn State Extension).

Outdoor and indoor parts

The outdoor section holds a compressor and condenser, and refrigerant-filled tubing links it to an indoor air handler (Penn State EGEE 102). As refrigerant flows through that tubing, it runs a basic refrigeration cycle that warms or cools the indoor coils (Penn State EGEE 102). Inside the air handler, a blower draws in room air, moves it across those coils, and pushes it through ductwork back into the rooms (Penn State EGEE 102). For model details, check the nameplate and the manufacturer's manual, or ask a licensed technician to read them on site.

Backup heat and the balance point

These units need a backup system once outdoor temperatures fall below a certain level (Penn State EGEE 102). As outdoor temperature drops, the house needs more heat while the heat pump's output falls, and at some point the two match (Penn State EGEE 102). That temperature is the balance point (Penn State EGEE 102). The balance point usually lands between "30-45 degrees Fahrenheit" (Penn State EGEE 102). Below that temperature, supplemental heat is required (Penn State EGEE 102). On particularly cold days, electric-resistance elements switch on inside the air handler and add warmth to the air passing through (Penn State EGEE 102).

Efficiency ratings to look for

SEER, the seasonal energy efficiency ratio, compares the cooling a system delivers over a season with the electricity it uses in that same season (Penn State Extension). HSPF works the same way for heating: the heat delivered across a typical heating season is divided by the energy used in that period (Penn State Extension). ENERGY STAR's key product criteria for heat pump equipment set three minimums for split systems: "7.8 HSPF2", "15.2 SEER2" and "11.0 EER2" (ENERGY STAR). For single package equipment the minimums are "7.2 HSPF2", "15.2 SEER2" and "10.0 EER2" (ENERGY STAR). ENERGY STAR's page defines SEER2 and HSPF2 separately from SEER and HSPF: the two newer values are determined under Appendix M1, and SEER and HSPF under Appendix M (ENERGY STAR). The same page lists higher HSPF2 minimums under its Cold Climate Requirements (ENERGY STAR). Check the current ENERGY STAR criteria before you buy.

Where to get a check on your system

For details about a specific unit, the nameplate, the manual, or the manufacturer's data is the place to look. Blume Mechanical Service (license CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties, and is brand-agnostic.

Frequently asked

Is an air source heat pump the same thing as a heat pump?

It is one type of heat pump (Penn State Extension). Penn State Extension lists four types (Penn State Extension), and the air-source design is the one that moves heat between a house and the outdoor air (Penn State Extension).

Does an air source heat pump make heat?

It moves heat instead of generating it (Penn State Extension). The source notes that this approach can keep a space comfortable (Penn State Extension).

Does it still heat when it is cold outside?

The source describes the winter mode as extracting heat from outside air and delivering it indoors (Penn State EGEE 102). Below the balance point, supplemental heat is required (Penn State EGEE 102).

Does it need electricity?

Almost every air-source or air-to-air unit runs on electricity (Penn State EGEE 102). Penn State Extension describes heat pumps as units that use electricity to transfer heat (Penn State Extension).

Can an air source heat pump cool a house?

Yes. The source describes the summer mode as pulling heat out of room air and releasing it outside, which cools the home (Penn State EGEE 102).

What efficiency rating should I look for?

Look for equipment that meets ENERGY STAR's key product criteria, which set minimum SEER2, HSPF2 and EER2 values for split systems and single package equipment (ENERGY STAR). For split systems those minimums are "7.8 HSPF2", "15.2 SEER2" and "11.0 EER2" (ENERGY STAR).

Related

Need an HVAC check on your heat pump? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Last updated: 2026-11-20

Sources: Penn State Extension — Heat Pump Basics (https://extension.psu.edu/heat-pump-basics) · Penn State EGEE 102 — 9.9.1 Air Source Heat Pumps (https://courses.ems.psu.edu/egee102/node/2487) · ENERGY STAR (U.S. EPA and DOE) — Air-Source Heat Pumps Key Product Criteria (https://www.energystar.gov/products/air_source_heat_pumps/key-product-criteria)

Search Google for what is an air source heat pump