Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

What Is a Heat Pump? A Plain Explanation for Homeowners

A heat pump is a heating and cooling system that moves heat from one place to another rather than generating it (Penn State Extension; DOE savings article). In cold seasons a heat pump moves heat from the cool outdoors into the home, and in warmer seasons it moves heat from the home to the outdoors (DOE savings article).

Penn State Extension describes heat pumps as an alternative to furnaces and air conditioners in all climates, while the DOE Heat Pumps page says they can be an efficient choice in moderate climates (Penn State Extension; DOE Heat Pumps page). DOE says that until recently air-source heat pumps were not used where temperatures stay subfreezing for long periods, and that they are now a legitimate option for colder regions (DOE savings article). DOE also reports that more than 17 million housing units had heat pumps as of 2020 (DOE savings article).

How the refrigerant cycle moves heat

A heat pump contains a refrigerant, a fluid that absorbs heat (Penn State Extension). In the first step, the refrigerant takes in heat from the outside air, the ground or water and evaporates into a gas (Penn State Extension). A compressor then squeezes that gas, which raises its temperature and pressure (Penn State Extension). In the condenser, the hot gas releases heat into the indoor space and cools into a liquid (Penn State Extension). An expansion valve then lowers the liquid's pressure and temperature so it can absorb heat again (Penn State Extension). Penn State Extension notes the same loop is known as the refrigeration cycle, and that it relies on changing refrigerant pressure with compression and expansion (Penn State Extension).

Heating and cooling from one system

According to Penn State Extension, the units can give comfortable indoor temperatures in cooling and heating modes, and they do this with greater efficiency (Penn State Extension). Air-source units handle both heating and cooling (Penn State Extension). DOE describes the seasonal pattern: in winter the unit brings outdoor heat indoors, and in summer it sends indoor heat outdoors (DOE savings article). Penn State Extension also lists all-year comfort as a benefit (Penn State Extension).

The main types

Air-source units are the most widespread kind, moving heat between a house and the surrounding air (Penn State Extension; DOE savings article). DOE's Heat Pumps page lists air-source, geothermal, mini-split and absorption systems among the types available (DOE Heat Pumps page). A ductless version of the air-source system is called a mini-split heat pump, and it is available for homes without ducts (DOE savings article). DOE also describes a reverse cycle chiller, an air-source unit that makes hot and cold water rather than air, which can serve radiant floor heating (DOE savings article). Geothermal units move heat between a home and the ground or a nearby water body (DOE savings article). DOE says these cost more up front but have low operating costs, and it links that to ground and water temperatures that stay relatively steady (DOE savings article).

Efficiency ratings

Penn State Extension gives SEER as cooling output divided by the power the system draws in the cooling season (Penn State Extension). HSPF is heating output over a typical heating season, divided by the energy the unit uses in that same period (Penn State Extension).

What a ton means in HVAC

Penn State Extension says a ton is a measure of heat added or removed in heating, ventilation and air conditioning systems (Penn State Extension). It equals 12,000 BTUs, and the average residential unit is 1 to 5 tons (Penn State Extension).

Energy use and climate

Penn State Extension says a heat pump can use less electricity for heating than electric resistance heat such as furnaces and baseboard heaters (Penn State Extension). DOE says the same of modern air-source heat pumps (DOE savings article). DOE says geothermal heat pumps can reduce energy use and control humidity (DOE savings article). Penn State Extension notes heat pumps do not burn fossil fuels and produce fewer greenhouse gas emissions (Penn State Extension).

Benefits the sources list

Penn State Extension lists three benefits: energy efficiency, environmental impact and versatility (Penn State Extension). It says heat pumps use less energy than conventional heating because they move heat instead of making it, and that this can bring lower bills (Penn State Extension). On versatility, it says one system can both warm and cool a building and keep it comfortable all year (Penn State Extension).

What manufacturers say about their units

Penn State Extension says a heat pump contains refrigerant, and DOE says heat pumps use electricity to transfer heat rather than create it (Penn State Extension; DOE savings article). Goodman, writing about its own products, says select indoor comfort systems use R-32, a refrigerant with low global warming potential (Goodman). Goodman also says its modern R-32 systems can feature inverter technology that adjusts how fast the compressor runs to match heating or cooling demand (Goodman).

Frequently asked

Can a heat pump both heat and cool a home?

Yes. According to Penn State Extension, one unit can heat and cool a building through the whole year (Penn State Extension). Air-source units handle both functions as well (Penn State Extension).

How does a heat pump get heat from outside air?

The refrigerant picks up heat from outdoor air, the ground or water and turns into a gas (Penn State Extension). A compressor then raises the gas's temperature and pressure, and the hot gas releases heat indoors (Penn State Extension).

What fuel does a heat pump burn?

Penn State Extension says heat pumps do not burn fossil fuels (Penn State Extension). DOE says they use electricity to transfer heat rather than create it (DOE savings article).

What are the main types of heat pumps?

DOE's Heat Pumps page lists air-source, geothermal, mini-split and absorption systems among the types available (DOE Heat Pumps page). Penn State Extension says the air-source heat pump is the most common type (Penn State Extension).

Do I need to call a pro for this?

Maybe. For a homeowner, the checks are the air filter, the thermostat settings, and keeping things away from the vents, the returns and the outdoor unit. Work on refrigerant or electrical parts calls for a licensed contractor. Penn State Extension says a heat pump contains refrigerant (Penn State Extension), and DOE says it runs on electricity (DOE savings article).

Related

Questions about a specific system can go to Blume Mechanical Service at (727) 330-9131.

Sources: Penn State Extension, Heat Pump Basics (updated April 1, 2025), https://extension.psu.edu/heat-pump-basics · DOE, Pump Up Your Savings with Heat Pumps (May 30, 2023), https://www.energy.gov/articles/pump-your-savings-heat-pumps · DOE, Heat Pumps, https://www.energy.gov/heat-pumps · Goodman, Heat Pumps, https://www.goodmanmfg.com/products/heat-pumps

Search Google for what is a heat pump