Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Spray foam insulation: safety notes for homeowners

Spray polyurethane foam is an effective insulation and air sealant material (EPA). Isocyanates can cause asthma and sensitization, so people with asthma, respiratory allergies or skin conditions should carefully review product information first (EPA). Ask the contractor for the re-occupancy time for the exact product (EPA).

Spray foam is used for insulation and air sealing, and it carries specific health and fire concerns. The points below cover the EPA statements that matter most to a homeowner, including the people who live in the building while the foam cures. Each fact names the source that stated it. Read the sections in order, since the health points and the re-entry points apply at different stages of the job.

What spray foam is

Spray polyurethane foam is an effective insulation and air sealant material (EPA). In the two-component professional system, Sides A and B are spray applied at elevated temperatures and pressure (EPA).

Side A contains very reactive chemicals known as isocyanates (EPA). Foam can expand up to 120 times its original volume (EPA).

The foam is not all one product. EPA lists several product types, so check which type the contractor plans to use before the work starts. Keep the product name and data sheet with your paperwork for the job.

Open-cell and closed-cell foam

Open-cell foam expands more vigorously than closed-cell foam and should be applied in layers (EPA). Ask the contractor which type will be used, and why, before the work starts.

For R-values and other performance figures, check the manufacturer's data sheet for the specific product.

Health effects of isocyanates

Exposure to isocyanates can cause contact dermatitis, skin and respiratory tract irritation, sensitization, and asthma (EPA). Isocyanates have been reported to be a leading chemical cause of work-related asthma, a potentially life-threatening disease (EPA).

There is no recognized safe level of exposure to isocyanates for sensitized individuals (EPA). Some workers who become sensitized to isocyanates are subject to severe asthma attacks if they are exposed again (EPA).

Symptoms may also be delayed up to several hours after exposure (EPA). Even people who are not sensitized may have skin and lung irritation, and many years of exposure may lead to permanent lung damage (EPA).

Who should be most careful

Individuals with a history of skin conditions, respiratory allergies, asthma, or prior isocyanate sensitization should carefully review product information (EPA). EPA says they may want to consider safer alternatives (EPA).

All skin contact should be avoided, since contact with skin may lead to respiratory responses or cause other allergic reactions (EPA).

Ask the contractor what protection the crew will use while the foam is applied.

Ventilation, re-entry and re-occupancy

Vapors and aerosols can migrate through the building if the area is not isolated and properly ventilated (EPA). Occupants should not enter the site until the manufacturer's re-occupancy procedures have been satisfied (EPA).

For the two-component high-pressure professional system, some manufacturers recommend 24 hours after application for re-occupancy by residents, but the recommended time may vary (EPA). For one-component foam in 12 oz. to 24 oz. cans, some manufacturers estimate about 8 to 24 hours to cure (EPA).

Contact your manufacturer or supplier for the ventilation, re-entry and re-occupancy times for your product (EPA). Air sampling and testing the indoor air after installation is one way to confirm the foam is completely cured (EPA). Write the times down and keep them with the estimate, so the schedule can be checked on the day of the work.

Fire, renovation and later work

Fires involving spray foam may release isocyanates, hydrogen cyanide, amines, and other toxic chemicals into the air (EPA). Ask the contractor how fire risk is handled on the job.

Building renovations, demolition, or building disassembly done years later can disturb spray foam insulation (EPA). Maintenance workers, including plumbers and electricians, should not heat or grind spray foam (EPA).

What is still unknown

The potential for off-gassing of volatile chemicals from spray polyurethane foam is not fully understood, and more research is needed (EPA). Ask the contractor what testing will be done after the foam is applied.

Homeowners should get clear guidance from contractors and manufacturers on the right time of year to install spray foam in their area (EPA).

Questions to ask before the work starts

Ask which spray foam product the contractor plans to use, and get the manufacturer's name in writing. Ask for the manufacturer's ventilation, re-entry and re-occupancy times for that product (EPA).

Ask who will be in the building while the foam cures, and when they may return. EPA advises that occupants should not enter the site until the manufacturer's re-occupancy procedures have been satisfied (EPA).

Ask whether anyone in the household has asthma, respiratory allergies, skin conditions or a history of isocyanate sensitization. EPA advises those people to review product information carefully before the work begins (EPA).

Frequently asked

Is spray foam an effective insulation?

Spray polyurethane foam is an effective insulation and air sealant material (EPA). Foam can expand up to 120 times its original volume (EPA).

What is the difference between open-cell and closed-cell foam?

Open-cell foam expands more vigorously than closed-cell foam and should be applied in layers (EPA). Check the manufacturer's data sheet for the R-value of the product you are considering.

Can someone with asthma be in a home with spray foam?

Individuals with a history of asthma or prior isocyanate sensitization should carefully review product information (EPA). Exposure to isocyanates can cause asthma (EPA).

How long should people stay out after spray foam is applied?

For the two-component high-pressure professional system, some manufacturers recommend 24 hours after application for re-occupancy by residents, but the recommended time may vary (EPA). Contact your manufacturer or supplier for the time for your product (EPA).

Can spray foam be cut or heated later?

Renovation or demolition done years later can disturb spray foam insulation (EPA). Maintenance workers, including plumbers and electricians, should not heat or grind spray foam (EPA).

Is spray foam a fire risk?

Fires involving spray foam may release isocyanates, hydrogen cyanide, amines, and other toxic chemicals into the air (EPA). Ask the contractor how fire risk is handled on the job.

Related

Need an HVAC check on the air conditioner in your home? Blume Mechanical Service (license CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Sources: U.S. Environmental Protection Agency — Quick Safety Tips for Spray Polyurethane Foam Users (https://archive.epa.gov/epa/saferchoice/quick-safety-tips-spray-polyurethane-foam-users.html) · U.S. Environmental Protection Agency — Spray Polyurethane Foam Product Types (https://archive.epa.gov/epa/saferchoice/spray-polyurethane-foam-product-types.html) · U.S. Environmental Protection Agency — Health Concerns about Spray Polyurethane Foam (https://archive.epa.gov/epa/saferchoice/health-concerns-about-spray-polyurethane-foam.html) · U.S. Environmental Protection Agency — Potential Chemical Exposures From Spray Polyurethane Foam (https://archive.epa.gov/epa/saferchoice/potential-chemical-exposures-spray-polyurethane-foam.html)

Search Google for spray foam insulation safety