HVAC, explained
What Counts as High Humidity Indoors
EPA's guidance is to keep indoor relative humidity below a reading of 60, and ideally between 30 and 50 (EPA biological contaminants). Moisture left uncontrolled indoors can feed unwanted biological growth (EPA biological contaminants), and EPA's mold guide notes there are many kinds of mold, none able to grow without water or moisture (EPA guide).
EPA gives the upper line for indoor relative humidity as a reading of 60, while AprilAire, whose page promotes its own dehumidifier, gives a range of 40-60. EPA ties indoor moisture to mold growth and to condensation on cold surfaces, and AprilAire adds mites to that list.
The EPA figures
EPA's biological contaminants guidance tells readers to hold indoor relative humidity under a reading of 60, with 30 to 50 as the ideal (EPA biological contaminants). The EPA brief guide to mold gives the same upper line, framed as a goal to meet if possible (EPA guide). EPA's ten-things list puts the figure at 30-60 and frames it as a way of slowing mold growth through lower humidity (EPA ten things).
The AprilAire range and its claims
AprilAire, whose page promotes its own dehumidifier, gives a range of 40-60 for a basement and crawl space (AprilAire). The page says that keeping humidity between 40-60 in those spaces reduces the amount of viable airborne viruses in the home (AprilAire). It also says this range significantly lowers allergy and asthma triggers such as dust mites, mold and mildew (AprilAire). These are AprilAire's own statements, not an EPA figure. AprilAire says mites cannot survive at a relative humidity reading of 50, because of their thin layer of skin, and that they need hot, moist air (AprilAire).
Why the high side matters
Humid air that meets a chilled surface can release water as condensation, EPA explains (EPA biological contaminants). EPA's mold guide says condensation can signal high humidity, and if wet spots show up on windows, walls or pipes, it says to act quickly by drying them and cutting the moisture or water source (EPA guide). The guide also says "The key to mold control is moisture control." (EPA guide). EPA's ten-things list says removing every bit of mold and spores from indoor air is not practical, and that moisture control is how indoor mold growth is kept in check (EPA ten things). That list names allergic reactions, asthma and other breathing complaints among possible effects of mold exposure (EPA ten things). EPA's guide says mold can trigger asthma attacks in people who have asthma and are allergic to mold (EPA guide). EPA says mold damages what it grows on, and more damage can follow the longer it grows (EPA mold cleanup). AprilAire says most homes add 25 pounds of moisture daily from everyday activities such as showering and dishwashing (AprilAire). AprilAire adds that with limited ventilation, this moisture stays put and heightens the chance of mold, mildew or mite problems (AprilAire).
What to do when readings run high
EPA says air conditioning can reduce humidity, and that if indoor humidity is consistently above a reading of 60, a specific dehumidification strategy should be employed (EPA biological contaminants). The EPA guide names several ways to lower humidity: venting clothes dryers, stoves and kerosene heaters outdoors where possible, using air conditioners or dehumidifiers as needed, running a bathroom fan or cracking a window during showers, and using exhaust fans or windows while cooking or washing dishes (EPA guide). Fuel-burning appliances, including stoves and kerosene heaters, give off water vapor, and EPA says indoor humidity rises with them unless they are vented outdoors (EPA guide). EPA's ten-things list says adding insulation can reduce condensation on cold surfaces (EPA ten things). For a bathroom where mold keeps coming back, EPA says more ventilation and more frequent cleaning will usually prevent recurrence or keep the mold to a minimum (EPA mold cleanup).
Checking the reading and the HVAC system
EPA's guide says a moisture or humidity meter, available at many hardware stores, can measure relative humidity (EPA guide). EPA also says that if you suspect the heating, ventilation and air conditioning system is contaminated with mold, you should consult its guide on whether to have the air ducts cleaned before taking further action (EPA mold cleanup). EPA says "Do not run the HVAC system" if mold is known or suspected in it. It could spread mold throughout the building (EPA mold cleanup). EPA's guide says hidden mold may sit behind drywall, wallpaper or paneling, under carpets and pads, or inside ductwork, and that you may suspect it when a building smells moldy but the source cannot be seen (EPA guide).
Drying materials and fixing the water problem
EPA's guide says it matters to get water-damaged areas and items dry inside 24-48 hours, which helps keep mold from starting (EPA guide). EPA's biological contaminants guidance says to dry wet materials thoroughly and quickly, with 24-48 hours as the ideal window (EPA biological contaminants). EPA's guide says that if you clean up mold but do not fix the water problem, the mold will most likely come back (EPA guide). EPA says not to paint or caulk moldy surfaces, and to clean up the mold and dry the surface before painting (EPA mold cleanup). For a moldy area of less than about 10 square feet, EPA says that in most cases a homeowner can handle the job, but a lot of water damage or mold covering more than 10 square feet calls for EPA's guide on remediation in schools and commercial buildings, which EPA says also applies to other building types (EPA mold cleanup). Hiring a contractor? EPA advises confirming prior experience with mold work (EPA mold cleanup).
Frequently asked
Is a relative humidity reading of 60 too high indoors?
EPA's biological contaminants guidance says to keep indoor relative humidity below a reading of 60, and ideally between 30 and 50 (EPA biological contaminants). EPA's ten-things list gives 30-60 as the range for reducing indoor humidity to slow mold growth (EPA ten things), and AprilAire gives 40-60 (AprilAire).
Does high humidity cause mold?
EPA's mold guide notes there are many kinds of mold, and none will grow without water or moisture (EPA guide). It also says indoor mold can be prevented or controlled by controlling moisture (EPA guide). Its biological contaminants page says unchecked indoor moisture can feed unwanted biological growth (EPA biological contaminants).
What does condensation on windows mean?
EPA's mold guide says condensation can signal high humidity (EPA guide). If condensation shows up on windows, walls or pipes, the guide says to act quickly to dry the surface and lower the moisture or water source (EPA guide).
Do air conditioners and dehumidifiers lower indoor humidity?
EPA's guide lists air conditioners and dehumidifiers among actions that reduce humidity, to be used as needed (EPA guide). EPA's biological contaminants guidance says air conditioning can reduce humidity, and that if indoor humidity is consistently above a reading of 60, a specific dehumidification strategy should be employed (EPA biological contaminants).
Do I need to call a pro for this?
Maybe. A homeowner can check the air filter and the thermostat settings, and keep things away from the vents, returns and the outdoor unit. For mold covering more than 10 square feet, or a possibly contaminated HVAC system, EPA points readers to its remediation and air-duct guides (EPA mold cleanup). That work belongs with a licensed contractor, and EPA says to make sure whoever is hired has experience cleaning up mold (EPA mold cleanup). EPA says "Do not run the HVAC system" if it is known or suspected to be contaminated with mold (EPA mold cleanup).
Related
- Good Humidity for a House: The Range, the Reading and What to Check
- Moisture control in homes: what EPA and DOE say
- Dew point vs relative humidity explained
- Mold testing: is it needed? What EPA says
- How to Lower Humidity in a House
Questions about a specific system can go to Blume Mechanical Service at (727) 330-9131.
Sources: EPA, Biological Contaminants and Indoor Air Quality, https://www.epa.gov/indoor-air-quality-iaq/biological-contaminants-and-indoor-air-quality · EPA, A Brief Guide to Mold, Moisture and Your Home, https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home · EPA, Mold Cleanup in Your Home, https://www.epa.gov/mold/mold-cleanup-your-home · EPA, What are ten things I need to know about mold?, https://www.epa.gov/mold/what-are-ten-things-i-need-know-about-mold · AprilAire, Humidity Control for Healthy Basement Air Impacts Your Entire Home, https://www.aprilaire.com/humidity-control