Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Mold testing: is it needed? What EPA says

EPA says that in most cases, if visible mold growth is present, sampling is unnecessary (EPA). EPA says routine sampling for mold is not recommended (EPA). EPA also says that if there is mold growth in your home, you must clean up the mold and fix the water problem (EPA).

This page covers whether a mold test is needed before cleanup. This page explains what the U.S. Environmental Protection Agency says about mold sampling, when it may still be useful, and why visible mold is the sign EPA names first. Each statement names its source, so you can check the wording against EPA's own pages. Use the questions at the end of this page as a checklist before you agree to any sampling.

When visible mold is present

EPA says that in most cases, if visible mold growth is present, sampling is unnecessary (EPA). The same agency says the most important sign of a mold problem is visible mold (EPA).

EPA says you do not need to sample unless the results would or could make a change in your plans (EPA). Think about what you would do differently with a result before you pay for one.

What routine sampling cannot show

EPA says routine sampling for mold is not recommended (EPA). EPA says air sampling for mold provides information only for the moment when the sampling took place (EPA). Air sampling is one kind of sampling, and the next paragraph covers surface sampling.

EPA warns that inadequate sample plans may generate misleading, confusing and useless results (EPA).

When sampling may still be useful

EPA says surface sampling may be useful in determining if an area has been adequately cleaned or remediated (EPA).

EPA says some inexpensive and quick tests can be conducted if mold is suspected (EPA). EPA also says investigating hidden mold requires caution, since disturbing moldy areas may spread mold throughout the building (EPA).

Why results need experience to read

EPA says sampling results will be difficult to interpret for someone without experience (EPA).

EPA says that if you lack extensive experience or are in doubt about sampling, consult an experienced professional (EPA). Ask the person doing the sampling how they will explain each result to you.

Fix the water problem

EPA says that if you clean up the mold but do not fix the water problem, the mold problem will most likely come back (EPA). EPA says the key to mold control is moisture control (EPA).

EPA says it is important to dry water-damaged areas and items within 24-48 hours to prevent mold growth (EPA).

Health concerns and when to see a professional

EPA says molds have the potential to cause health problems (EPA). EPA says if you have health concerns, consult a health professional before starting cleanup (EPA).

EPA says that if you believe you may have a hidden mold problem, consider hiring an experienced professional (EPA). This is the case where EPA names hiring help directly.

Clean up and remove moisture sources

EPA says if mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture (EPA).

Questions to ask before you pay for a test

Start with the question EPA's guidance turns on: would the result change your plans (EPA)? EPA says you do not need to sample unless the results would or could make a change in your plans (EPA).

Ask whether the sample plan says where and when samples will be taken. EPA warns that inadequate sample plans may generate misleading, confusing and useless results (EPA).

Ask who will explain the results. EPA says sampling results will be difficult to interpret for someone without experience (EPA).

If the question is whether a cleanup worked, ask about surface sampling. EPA says surface sampling may be useful in determining if an area has been adequately cleaned or remediated (EPA). Write down each answer so you can compare providers on the same points.

Frequently asked

Do I need to test for mold if I can see it?

EPA says that in most cases, if visible mold growth is present, sampling is unnecessary (EPA). The most important sign of a mold problem is visible mold, according to EPA (EPA).

Is routine mold testing recommended?

EPA says routine sampling for mold is not recommended (EPA). EPA says you do not need to sample unless the results would or could make a change in your plans (EPA).

When is surface sampling useful?

EPA says surface sampling may be useful in determining if an area has been adequately cleaned or remediated (EPA). EPA also says some inexpensive and quick tests can be conducted if mold is suspected (EPA).

Can an air sample tell me the whole story?

EPA says air sampling for mold provides information only for the moment when the sampling took place (EPA). EPA also warns that inadequate sample plans may generate misleading, confusing and useless results (EPA). EPA says sampling results will be difficult to interpret for someone without experience (EPA).

Should I hire a professional to look for hidden mold?

EPA says that if you believe you may have a hidden mold problem, consider hiring an experienced professional (EPA). EPA also says investigating hidden mold requires caution, since disturbing moldy areas may spread mold throughout the building (EPA).

Do I have to fix the water problem too?

EPA says that if you clean up the mold but do not fix the water problem, the mold problem will most likely come back (EPA). EPA says the key to mold control is moisture control (EPA).

Related

Need an HVAC check for moisture or airflow problems in your Florida home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Sources: U.S. Environmental Protection Agency — A Brief Guide to Mold, Moisture and Your Home (https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home) · U.S. Environmental Protection Agency — Mold Course Chapter 3: (https://www.epa.gov/mold/mold-course-chapter-3) · U.S. Environmental Protection Agency — What are ten things I need to know about mold? (https://www.epa.gov/mold/what-are-ten-things-i-need-know-about-mold)

Search Google for is mold testing needed