HVAC, explained
Commercial building O&M tune-up program basics
Integrating energy efficiency into operation and maintenance can reduce energy use without significant capital investment (ENERGY STAR). A rigorous O&M tune-up begins with a thorough assessment of current practices, and savings accrue only when the recommendations are implemented (ENERGY STAR). Many improvements may be implemented very quickly and inexpensively (ENERGY STAR).
An operation and maintenance, or O&M, tune-up looks at how equipment is controlled and scheduled as well as how it is maintained (ENERGY STAR). The sections below walk through the parts of that approach named on the ENERGY STAR page.
What an O&M tune-up covers
Building equipment and systems should be appropriately calibrated and tuned to run as efficiently as possible, scheduled to run only as needed, and periodically checked to prevent performance drift (ENERGY STAR). Integrating energy efficiency into operation and maintenance can reduce energy use without significant capital investment (ENERGY STAR).
Start with a thorough assessment
A rigorous O&M tune-up requires performing a thorough assessment of the current operation and maintenance practices (ENERGY STAR). The assessment may include spot testing equipment and controls, checking pressures, temperatures, power, flows and lighting use over time, and reviewing schedules and control strategies (ENERGY STAR).
Savings can only accrue if recommendations from the assessment are implemented (ENERGY STAR). Write the findings down in a list ranked by what you will fix first.
Fix schedules and controls first
Control strategy or schedule improvements, where the greatest savings often occur, may take only a few hours to implement (ENERGY STAR). The payback for improved scheduling is almost immediate (ENERGY STAR). The number one way to waste energy is to leave equipment and lights on when they could be off (ENERGY STAR).
Equipment may operate very efficiently, but if it is on when nobody is home, the only thing happening is energy waste (ENERGY STAR). Review the time-of-day schedules, setbacks and on-off controls in each area, since a schedule can stay changed long after the reason for the change has passed.
Use energy management systems fully
Staff often use energy management systems only to turn equipment on and off (ENERGY STAR). These systems can be programmed to accomplish control strategies such as optimal start/stop, air- and water-side economizing, chilled and heating water resets, night setback and setup, and morning warm-up (ENERGY STAR).
Before changing a system, check whether its controls can run these strategies.
Keep the settings from drifting
Because many people often have access to lighting and HVAC controls, parameters and schedules may be changed to meet a special need or unusual condition and never get changed back to their original setting unless preventive maintenance procedures for addressing operational issues are in place (ENERGY STAR). Relying on memory can lead to mistakes that cost time and energy (ENERGY STAR).
Poor equipment operation can lead to premature equipment failure, such as short-cycling, and an increase in maintenance requirements (ENERGY STAR). Typically, the primary goal of the preventive maintenance plan is reliability and increased equipment life (ENERGY STAR).
Document controls and check them each season
Documenting the sequence of operation and energy-efficient control strategies for the energy-using systems is essential to understanding building control (ENERGY STAR). The control documentation is critical for maintaining energy-efficient operation and effectively troubleshooting operational problems (ENERGY STAR).
Just as certain maintenance tasks are performed to prepare equipment for heating or cooling season, control strategies should also be reviewed and adjusted (ENERGY STAR). A good control strategy for cooling season is not necessarily optimal for swing season or heating season (ENERGY STAR).
Walk through the building after hours
Building staff should perform an after-hours walk-through once every six months to observe the behavior of heating and cooling equipment, lighting, and office equipment such as copiers, printers, and computers (ENERGY STAR). Alternatively, portable dataloggers at the electric panels can track whether equipment is on when it should not be (ENERGY STAR).
The program also recommends O&M procedures and forms for tracking actual equipment performance against expected performance (ENERGY STAR).
Reinvest the savings
Once an organization funds the initial O&M assessment and tune-up improvements, future energy efficiency work can be funded from the savings generated by the low-cost O&M improvements (ENERGY STAR). This kind of sustainable finance mechanism requires monitoring and tracking savings so that they can be dedicated to future improvements (ENERGY STAR).
Once the improvements are selected and prioritized, many of them may be implemented very quickly and inexpensively (ENERGY STAR). Confirm any cost or contract terms with your facility team or a licensed contractor before committing funds.
Frequently asked
Does an O&M tune-up need major equipment purchases?
Integrating energy efficiency into operation and maintenance can reduce energy use without significant capital investment (ENERGY STAR). Control strategy or schedule improvements may take only a few hours to implement (ENERGY STAR).
What is the first step in an O&M tune-up?
A rigorous O&M tune-up requires performing a thorough assessment of the current operation and maintenance practices (ENERGY STAR). The assessment may include spot testing equipment and controls (ENERGY STAR).
Why do schedules matter so much?
The number one way to waste energy is to leave equipment and lights on when they could be off (ENERGY STAR). The payback for improved scheduling is almost immediate (ENERGY STAR).
How often should staff check a building after hours?
Building staff should perform an after-hours walk-through once every six months (ENERGY STAR). Portable dataloggers at the electric panels can track whether equipment is on when it should not be (ENERGY STAR).
Why should control strategies change with the season?
Control strategies should be reviewed and adjusted as heating or cooling season approaches (ENERGY STAR). A good control strategy for cooling season is not necessarily optimal for swing season or heating season (ENERGY STAR).
Can O&M savings pay for later efficiency work?
Future energy efficiency work can be funded from the savings generated by the low-cost O&M improvements (ENERGY STAR). Monitoring and tracking savings is required so they can be dedicated to future improvements (ENERGY STAR).
Related
- Commercial building scheduling and controls
- Commercial HVAC seasonal maintenance checklist
- Indoor Air Quality at Home: How to Monitor It and How to Improve It
Need HVAC service on the equipment in your commercial building? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: ENERGY STAR (U.S. EPA and DOE) — Operation and Maintenance Best Practices | ENERGY STAR (https://www.energystar.gov/buildings/save-energy-commercial-buildings/ways-save/om-best-practices)