HVAC, explained
Low-e coatings and window film for homes
Low-e coatings are thin layers on glass that can reduce summer heat gain (U.S. Department of Energy). The U.S. Department of Energy says tinting also reduces solar heat gain, but it reduces how clearly you can see through the glass (U.S. Department of Energy).
A low-e coating and a window film both change how much sun a window lets into a room. This guide covers what federal sources say about each option, where they fit in a warm climate, and what to check before you buy. Each fact names its source, so you can see which statements come from the Department of Energy and which come from ENERGY STAR.
What a low-e coating does
A low-e coating is a thin layer deposited directly on the surface of one or more panes of glass (U.S. Department of Energy). Features impacting the solar heat gain coefficient, or SHGC, include low-e coatings and tints (U.S. Department of Energy).
Windows with low-e coatings, especially spectrally selective coatings, reduce summer heat gain and air conditioning costs without much loss of visible light (U.S. Department of Energy). The same federal guidance notes that fenestration products with low-e coatings come in low, moderate and high solar gain versions (U.S. Department of Energy).
Why warm climates call for low SHGC
In warm climates, where air conditioning costs are the concern, the U.S. Department of Energy says to buy or specify products with low SHGCs to reduce unwanted heat gain (U.S. Department of Energy).
A low-e coating is one of the features that changes the SHGC (U.S. Department of Energy). Ask for the SHGC of each product before you compare estimates.
Tinting compared with coatings
Although tinting can reduce solar heat gain, it also reduces the ability to see clearly through a glazing unit (U.S. Department of Energy). The federal guidance says tinting is not recommended for residential buildings (U.S. Department of Energy).
A coating and a tint are different features, so read the product listing to see which one the window uses before you compare the two.
Low-e storm windows
ENERGY STAR certified storm windows use low emissivity glass to improve energy performance compared with clear glass storm windows (ENERGY STAR). A storm window with low-e glass has a coating that reduces heat loss through the glass when it is cold outside (ENERGY STAR).
Low-e storm windows offer savings potential when installed over single-pane windows that do not have low-e glass (ENERGY STAR). Some low-e glass also has a low solar transmittance rating that can help keep a house cooler in summer (ENERGY STAR). The ENERGY STAR label makes it easy to select low-e storm windows designed to deliver cost-effective energy savings in your area (ENERGY STAR).
When a storm window does not fit
Some types of durable plastic storm windows may also have low-e characteristics (ENERGY STAR). The climate where you live affects which low-e storm window product suits your location (ENERGY STAR).
Adding low-e storm windows may not be appropriate if current windows are rotted, not operating properly, or damaged beyond reasonable repair (ENERGY STAR). Check the condition of the existing window before you buy a storm unit for it.
What research found about low-e storm windows
Low-e storm windows cost about a quarter of what full window replacement would cost today, but they bring similar energy savings (U.S. Department of Energy). The same Department of Energy page says a low-e coating further improves overall performance by increasing the window's radiant heat reflectance (U.S. Department of Energy).
Researchers at a national lab first proposed a durable low-e coating on storm windows in the late 1990s (U.S. Department of Energy). The proposal described a durable coating that could offer a cost-effective insulating and sealing measure for existing windows (U.S. Department of Energy).
Films still in development
The U.S. Department of Energy describes a research window insulation technology that uses vacuum insulation materials (U.S. Department of Energy). The capsules in that research are applied like typical window tinting, according to the Department of Energy (U.S. Department of Energy).
The research combines low-e coated plastic films with current window retrofit technologies to boost their energy efficiency (U.S. Department of Energy). This research is still in development (U.S. Department of Energy).
Before you buy
Ask the seller for the SHGC and the product's low-e details, and compare them on the same points for each quote.
Blume Mechanical Service repairs, installs and maintains HVAC and refrigeration equipment, so an HVAC check can also cover the air conditioner that carries your cooling load.
Frequently asked
Does a low-e coating reduce air conditioning costs?
Windows with low-e coatings, especially spectrally selective coatings, reduce summer heat gain and air conditioning costs without much loss of visible light (U.S. Department of Energy).
Is tint the same as a low-e coating?
No. Features impacting the solar heat gain coefficient include low-e coatings and tints (U.S. Department of Energy). Tinting reduces solar heat gain but also reduces how clearly you can see through the glass (U.S. Department of Energy).
Should I use a tint in a home?
The U.S. Department of Energy says tinting is not recommended for residential buildings (U.S. Department of Energy). Compare the SHGC and visible light of each product instead.
Do low-e storm windows cost less than replacement?
Low-e storm windows cost about a quarter of what full window replacement would cost today, but they bring similar energy savings (U.S. Department of Energy).
When should I not add a storm window?
Adding low-e storm windows may not be appropriate if current windows are rotted, not operating properly, or damaged beyond reasonable repair (ENERGY STAR).
Are vacuum-insulation films on the market?
The U.S. Department of Energy describes a research technology that is still in development (U.S. Department of Energy). Ask a licensed contractor which products are available for your windows.
Related
- ENERGY STAR commercial kitchen equipment and energy use
- Indoor air quality in schools and HVAC
- Cool roofs and air conditioning load in Florida
Need an HVAC check on the air conditioner in your Florida home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: U.S. Department of Energy — Purchasing Energy-Efficient Residential Windows, Doors, and Skylights (https://www.energy.gov/cmei/femp/purchasing-energy-efficient-residential-windows-doors-and-skylights) · U.S. Department of Energy — EERE Success Story—Performance Validation of Low-e Storm Windows Paves Way for Market Acceptance (https://www.energy.gov/cmei/success-stories/articles/eere-success-story-performance-validation-low-e-storm-windows-paves) · U.S. Department of Energy — Cutting-Edge Building Technologies Offer Big Energy Savings Potential (https://www.energy.gov/cmei/articles/cutting-edge-building-technologies-offer-big-energy-savings-potential) · ENERGY STAR — Storm Windows (https://www.energystar.gov/products/storm_windows_0)