Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

What Is an Air Handler?

An air handler, also called an air handling unit, is the indoor unit that belongs to a heat pump or air-conditioning system (Lennox). Its job is to move conditioned air into the ductwork: a blower fan drives that air through the ducts and into each room (Carrier).

Carrier calls the air handler the indoor component of an HVAC system that circulates conditioned air through the home, and it also goes by the name fan coil unit (Carrier). Trane says the unit is matched in capacity and efficiency with the heat pump it works with (Trane).

What the air handler does in each cycle

Carrier describes the process as a series of steps. Return ducts pull indoor air back into the unit (Carrier). A filter then catches dust and dander as the air enters, so the air is cleaner before it is conditioned (Carrier). The air next passes over the evaporator coil, a heating coil or an electric heat strip, depending on the mode the system is in (Carrier). Carrier notes that this step also helps remove excess moisture, which keeps humidity in check (Carrier). Finally, the blower motor pushes the conditioned air through the supply ducts and into the living spaces (Carrier). In a zoned home, the system will steer that airflow toward the areas that need it most (Carrier). Carrier gives MERV 1 to 16 as the common span for residential filters, and MERV 8 to 13 as a practical range for many residential uses when the filter is compatible with the system (Carrier).

Parts inside the cabinet

Trane lists the evaporator coil, a control board and the blower fan among the parts inside the cabinet (Trane). The cabinet may also hold a filter rack and UV lights, which Trane says help prevent mold in humid climates (Trane). Carrier describes the blower as the part that drives conditioned air through the ductwork and into every room (Carrier). Carrier says the evaporator coil cools air and pulls moisture out of it as part of the refrigeration cycle (Carrier). A filter stops dust, debris and airborne particles before they reach the rest of the equipment (Carrier). A drain pan and condensate drain collect and carry moisture out of the system, which helps protect the home from leaks and water damage (Carrier). An electric heat strip can supply supplemental heat when the climate or the system calls for it (Carrier).

How an air handler differs from a furnace

Lennox says an air handler moves air through the home in much the same way a furnace does. The main difference, Lennox says, is that the air handler only circulates heat when it is paired with a heat pump (Lennox). Carrier says the unit mainly moves and conditions air instead of making heat through combustion (Carrier). With a heat pump, Trane says the unit moves cooled air in summer and heated air in winter (Trane). Trane adds that optional auxiliary heat strips inside the unit can switch on during a sudden cold snap (Trane). Lennox lists an EVENHEATER option on its air handlers and says it warms air ahead of circulation through the home (Lennox).

How the air handler works with the outdoor unit

Carrier separates the roles: the indoor unit moves air, and the outdoor condenser handles the cooling of refrigerant (Carrier). Lennox says refrigerant lines link the indoor and outdoor pieces into one loop (Lennox). During cooling, warm indoor air crosses the evaporator coil, the refrigerant absorbs that heat, and the blower sends the cooled air back through the ducts into the home (Lennox). Lennox says the unit relies on the refrigerant cycle rather than making heat itself, while Trane says optional electric heat strips can add backup heat (Lennox; Trane). Carrier calls the air handler typically essential to the indoor side when a home has a split-system heat pump or a straight-cool air conditioner and no furnace (Carrier).

Airflow and filter care

Carrier's general reference links a 2-ton system to approximately 800 CFM and a 5-ton system to approximately 2,000 CFM (Carrier). Carrier notes that real airflow depends on the equipment, the ductwork and the blower, so an HVAC professional should check the sizing (Carrier). Carrier generally suggests swapping residential filters every 30 to 90 days, with the interval depending on filter type and how the home is used (Carrier). Carrier also warns that clutter, dust and debris near the unit can restrict airflow and put unneeded stress on the system (Carrier). A restricted filter, Lennox says, can set off weaker airflow, more blower motor strain and a higher chance of a frozen coil (Lennox).

Lifespan, inspection and warning signs

Carrier says a typical unit can last 15 to 25 years, with the real figure shifting with equipment, installation, upkeep and operating conditions (Carrier). Lennox gives a typical 15 to 20 years for an air handler and 10 to 15 years for a condenser unit (Lennox). Carrier advises scheduling an annual professional inspection (Carrier). Lennox says to have a technician inspect the evaporator coil every year (Lennox). Lennox lists the signs that the air handler needs attention as no airflow from the vents while the system runs, inconsistent room temperatures, climbing energy bills with no change in usage, and frozen evaporator coils (Lennox). Lennox says frozen coils usually trace to low refrigerant or restricted airflow, and both need professional attention (Lennox).

Replacing an air handler

Carrier warns that a new air handler set with an old outdoor unit can reduce efficiency and void warranties (Carrier). Carrier also says to always rely on a qualified professional for installation (Carrier). Lennox says interior debris removal belongs to a licensed technician (Lennox).

Frequently asked

Do I need an air handler if I have a furnace?

Carrier says the most common pairings are a heat pump or a straight-cool air conditioner, in homes without a furnace (Carrier). Carrier adds that a furnace usually takes over the airflow job, so a separate unit is often unnecessary (Carrier).

How long does an air handler last?

Carrier gives 15 to 25 years as a typical span, and real life depends on the equipment, the install and upkeep (Carrier). Lennox gives a typical 15 to 20 years for an air handler (Lennox).

Can I replace only the air handler and keep my old outdoor unit?

Carrier warns that a new air handler set with an old outdoor unit can reduce efficiency and void warranties (Carrier).

Does an air handler produce heat on its own?

Lennox says the unit relies on the refrigerant cycle rather than making heat itself, while Trane says optional electric heat strips can add backup heat (Lennox; Trane).

Do I need to call a pro for this?

Maybe. Carrier lists changing the air filter and keeping the area around the unit clear as tasks a homeowner can manage on their own (Carrier). Electrical work, refrigerant work, blower motor work and persistent performance problems should go to a licensed contractor (Carrier). Lennox also says interior debris removal belongs to a licensed technician (Lennox).

Related

Questions about a specific system can go to Blume Mechanical Service at (727) 330-9131.

Sources: Carrier, What Is an Air Handler?, https://www.carrier.com/us/en/residential/hvac-resources/air-handlers/what-is-an-air-handler/ · Trane, How Does an Air Handler Work?, https://www.trane.com/residential/en/resources/blog/how-does-an-air-handler-work/ · Trane, How a Heat Pump + Air Handler System Works, https://www.trane.com/residential/en/buyers-guide/hvac-basics/how-does-a-heat-pump-and-air-handler-matched-system-work/ · Lennox, Air Handler glossary, https://www.lennox.com/residential/buyers-guide/guide-to-hvac/glossary/air-handler-coil-blower · Lennox, Air Handler vs Condenser: What's the Difference?, https://www.lennox.com/residential/lennox-life/consumer/air-handler-vs-condenser

Search Google for what is an air handler