Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

What does run mean on a thermostat? Holds and the Run button

On Honeywell Series 2000 thermostats, pressing the "Run" button cancels a temporary or permanent override and resumes the schedule (Honeywell). Lennox's thermostat support pages say you can choose the option that cancels the schedule hold, which returns the schedule to normal operation (Lennox). Bryant lists its "Run Schedule" button as a way to end either a temporary or a permanent hold (Bryant).

Thermostat manuals use different words for a hold and for the control that ends one, so the wording on your screen may not match a page from another brand. Before you press any button, read the manual for your exact model, since the names one brand uses do not carry over to another.

What a hold does

Bryant describes two kinds of hold (Bryant). Under a temporary hold, the temperature you chose stays in place until the following program period comes up, and under a permanent hold it stays until you turn the hold off yourself (Bryant).

When you raise or lower the temperature during a scheduled program, Bryant says the thermostat will display a "Hold Until" message (Bryant). Bryant gives the example of coming home early and turning up the heat: the temporary hold keeps the room warm right away, and the thermostat drops the hold when the normal evening schedule starts (Bryant).

Check the display after you change a setting, so you can tell which kind of hold is active.

What Run does on a Honeywell Series 2000 thermostat

Honeywell says that pressing the button cancels a temporary or permanent override and resumes the schedule (Honeywell). Afterward, the Hold indicator clears and the unit goes to the setpoint programmed for the period now running (Honeywell).

Honeywell also suggests checking that the heat or cool switch matches the run mode you want (Honeywell).

These Honeywell instructions are for the Series 2000 thermostat (Honeywell). For another model, consult its manual.

What Cancel does, according to Lennox's support pages

According to Lennox's support pages, you can choose to cancel a schedule hold, and doing so puts the schedule back into normal operation (Lennox). Lennox notes that adjusting a setpoint while a schedule runs replaces the schedule's current settings (Lennox).

Lennox says a prompt asks how long to override the schedule, with durations of 1 hour, 2 hours, 8 hours or 24 hours, plus a custom option (Lennox). After the hold starts, the home screen shows a "Schedule Hold" status message (Lennox).

If you want the programmed schedule back, choose the cancel option on the screen (Lennox).

How long a hold lasts

By default, Lennox says the schedule stays on hold until the next period, and you can customize how long the hold lasts (Lennox). On Honeywell Series 2000 thermostats, a temporary override keeps the new temperature in place up to the start of the next scheduled time period (Honeywell).

Confirm the timing on your own unit.

Holds and energy use

Bryant says that relying on hold all the time, bypassing an energy-saving schedule, can push energy bills higher (Bryant). Bryant also says a permanent hold is especially useful when you leave home for an extended period, such as a vacation (Bryant).

Bryant says a hold saves energy only when the temperature you set is more efficient than your normal schedule (Bryant). Bryant describes hold as a tool for exceptions rather than the everyday setting, and suggests relying on the programmed schedule for most of your routine (Bryant).

When your routine changes, decide in advance whether a temporary or a permanent hold fits the situation.

The system takes time to reach a new setting

Honeywell notes that the heating or cooling system may take some time to reach the set point (Honeywell). Honeywell also says the screen can switch from showing the set point back to the room temperature after a short delay, which it describes as normal (Honeywell).

Allow a reasonable period before deciding the thermostat is not working. If the room stays off target for a long time, ask a licensed HVAC contractor to check the equipment.

Button labels differ between brands

The labels above differ from maker to maker, so the wording on your screen may be different again. Bryant adds that if the Hold notice stays on after you press "Run Schedule", restarting the thermostat is something to try (Bryant).

To confirm which button or option ends a hold on your unit, find the model number on the thermostat and read the manual for that model.

When to call a licensed HVAC contractor

If the thermostat does not behave as its manual describes, a licensed HVAC contractor can check the controls. Keep a note of the model, the display message and the time you pressed each button, since that record can help the technician see what happened.

Bryant adds that when a permanent hold will not release after standard troubleshooting, the problem may lie in the wiring or software (Bryant).

Blume Mechanical Service repairs, installs and maintains HVAC and refrigeration equipment, serving Pinellas, Hillsborough and Pasco counties.

Frequently asked

What does Run mean on a thermostat?

Honeywell's Series 2000 page says the "Run" button ends an override and puts the thermostat back on its schedule (Honeywell). Labels can differ between brands, so check the manual for your model.

How do I turn off a hold on a thermostat?

On a Honeywell Series 2000, press the button that cancels the override (Honeywell). Lennox's thermostat support pages say you can choose the option that cancels the schedule hold (Lennox).

What is the difference between a temporary and a permanent hold?

Bryant says a temporary hold keeps the temperature you chose until the following program period comes up, while a permanent hold keeps it until you turn the hold off yourself (Bryant).

How long does a hold last?

Lennox's support pages say a schedule hold lasts until the next period by default, and you can set a different duration (Lennox). On Honeywell Series 2000 thermostats, a temporary override keeps the new temperature up to the start of the next scheduled time period (Honeywell).

Does using hold waste energy?

Bryant says relying on hold all the time, bypassing an energy-saving schedule, can push energy bills higher (Bryant). The same page says a permanent hold is especially useful during a vacation or long absence (Bryant).

Why does the house not reach the new temperature right away?

Honeywell says the heating or cooling system may take some time to reach the set point (Honeywell). If the room stays off target for a long time, ask a licensed HVAC contractor to check the equipment.

Related

Need help with a thermostat that will not follow its schedule? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Last updated: 2026-11-20

Sources: Bryant — What Does Hold Mean on a Thermostat (https://www.bryant.com/en/ca/products/controls-thermostats/what-does-hold-mean-on-a-thermostat/) · Lennox — What does Schedule Hold mean? (https://www.lennox.com/residential/support/faqs/what-does-schedule-hold-mean) · Lennox — What happens if I cancel schedule hold? (https://www.lennox.com/residential/support/faqs/what-happens-if-i-cancel-schedule-hold) · Honeywell — How do I bypass the schedule on the Series 2000 thermostat? (https://honeywellhome.com/us/en/support/how-do-i-bypass-the-schedule-on-the-series-2000-thermostat)

Search Google for what does run mean on a thermostat