HVAC, explained
Natural ventilation cooling limits in humid climates
The Department of Energy (DOE) says ventilation is not an effective cooling strategy in hot, humid climates (DOE). In warm and humid climates, outdoor air warmer than indoor air can bring in additional moisture (EPA). Check indoor humidity before you rely on open windows.
Natural ventilation means letting outdoor air into a home rather than cooling it with equipment. The Department of Energy (DOE) and the Environmental Protection Agency (EPA) describe its limits in humid climates, and the sections below set those limits out for a home in a humid climate. Each fact names its source.
What DOE says about ventilation for cooling
Although ventilation is not an effective cooling strategy in hot, humid climates, the other approaches can significantly reduce the need to use air conditioning (DOE).
A combination of proper insulation, energy-efficient windows and doors, daylighting, shading, and ventilation will usually keep homes cool with a low amount of energy use in all but the hottest climates (DOE).
DOE suggests considering fans, evaporative coolers, or heat pumps as the primary means of cooling (DOE).
Why humid air changes the picture
In warm and humid climates, outdoor air that is warmer than indoor air can bring in additional moisture even when its relative humidity is lower (EPA).
Showers or even cooking can add moisture to the air in your building (EPA).
Cooking and showering also can add to indoor humidity (EPA).
When humid air contacts a cold surface, water vapor can condense, much like when moisture condenses on the outside of a cold glass of water on a humid day (EPA).
Condensation can be a sign of high humidity (EPA).
Without adequate ventilation, moisture may build up indoors and mold may grow (EPA).
Keeping indoor humidity in range
Keep indoor relative humidity below 60 percent, and ideally between 30 and 50 percent (EPA).
While air conditioning use can reduce humidity, if indoor humidity is consistently above 60 percent, a specific dehumidification strategy should be used (EPA).
Reduce indoor humidity to 30 to 60 percent to decrease mold growth by venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and dehumidifiers; increasing ventilation; and using exhaust fans whenever cooking, dishwashing, and cleaning (EPA).
The key to mold control is moisture control (EPA).
Uncontrolled indoor moisture can support unwanted biological growth (EPA).
Exhaust fans and outdoor air
Use a bathroom fan that vents to the outdoors, or open a window if conditions allow, during and after a shower (EPA).
Use a range hood or fan that vents to the outdoors when cooking, which can also generate moisture (EPA).
Moist areas, such as poorly ventilated bathrooms, can encourage the growth of biological contaminants, like mold, and attract pests (EPA).
Increasing ventilation can decrease indoor air pollution, including biological contaminants (EPA).
However, failure to remove contaminated materials and to reduce moisture and humidity can present serious long-term health risks (EPA).
Immediately fix leaks and other visible moisture issues and clean up visible mold with clean water and a detergent (EPA).
When to avoid bringing in outdoor air
Avoid ventilation with outdoor air when outdoor air pollution or pollen is high or during periods of extreme temperatures and humidity (EPA).
Increasing ventilation can decrease indoor air pollution, including biological contaminants (EPA).
Tight buildings and hidden moisture
Some buildings are tightly sealed but, in some cases, lack adequate ventilation (EPA).
A building must be properly designed for climate, site location and use, and its design must be accurately followed during construction or the building may have moisture-control problems (EPA).
Vapor barriers must be located and installed properly or the building may have moisture problems (EPA).
Crawl spaces where relative humidity is high are common sites of hidden mold growth, particularly with a bare earth floor (EPA).
Mold can grow on virtually any organic material as long as moisture and oxygen are present (EPA).
If the HVAC system is turned off during or shortly after major cleaning efforts that involve a lot of water, such as mopping and carpet shampooing or cleaning, the humidity may rise greatly, and moisture or mold problems may develop (EPA).
Controlling moisture is the most effective way of keeping mold from growing in air ducts (EPA).
Low humidity and pests
Low humidity may also discourage pests such as cockroaches and dust mites (EPA).
Condensation can be a sign of high humidity (EPA).
Who to call when humidity stays high
If indoor humidity stays high while the system runs, a licensed HVAC contractor can check the equipment and the moisture removal.
Blume Mechanical Service repairs, installs and maintains HVAC and refrigeration equipment.
Frequently asked
Can I cool a Florida house by opening windows?
DOE says ventilation is not an effective cooling strategy in hot, humid climates (DOE). In warm and humid climates, outdoor air warmer than indoor air can bring in additional moisture (EPA).
What indoor humidity should I aim for?
Keep indoor relative humidity below 60 percent, and ideally between 30 and 50 percent (EPA). If indoor humidity is consistently above 60 percent, a specific dehumidification strategy should be used (EPA).
Should I open a window after a shower?
Use a bathroom fan that vents to the outdoors, or open a window if conditions allow, during and after a shower (EPA). Cooking and showering also can add to indoor humidity (EPA).
When should I keep outdoor air out?
Avoid ventilation with outdoor air when outdoor air pollution or pollen is high or during periods of extreme temperatures and humidity (EPA).
Does ventilation prevent mold?
The key to mold control is moisture control (EPA). Without adequate ventilation, moisture may build up indoors and mold may grow (EPA). Controlling moisture is the most effective way of keeping mold from growing in air ducts (EPA).
Who can check the system if humidity stays high?
If indoor humidity stays high, a licensed HVAC contractor can check the equipment and the moisture removal.
Related
- ENERGY STAR dehumidifier efficiency and capacity
- Carbon monoxide sources indoors and how to reduce exposure
- Whole-house fans in humid climates: what to know
Need an HVAC check on the air conditioner in your Florida home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: U.S. Department of Energy — Home Cooling (https://www.energy.gov/energysaver/heat-and-cool/home-cooling) · U.S. Environmental Protection Agency — Biological Contaminants and Indoor Air Quality (https://www.epa.gov/indoor-air-quality-iaq/biological-contaminants-and-indoor-air-quality) · U.S. Environmental Protection Agency — Mold Course Chapter 2 (https://www.epa.gov/mold/mold-course-chapter-2) · U.S. Environmental Protection Agency — What are ten things I need to know about mold? (https://www.epa.gov/mold/what-are-ten-things-i-need-know-about-mold)