HVAC, explained
ENERGY STAR dehumidifier efficiency and capacity
A higher integrated energy factor generally means a more efficient dehumidifier (ENERGY STAR). The capacity you need depends on the size of the space and the conditions in it without dehumidification (ENERGY STAR). For a humid home with central air conditioning, ENERGY STAR says a whole-home unit may be the right choice (ENERGY STAR).
This page explains how ENERGY STAR and the U.S. Environmental Protection Agency (EPA) describe dehumidifier efficiency, capacity and humidity targets for homes. Each fact names its source, and the sections below keep each claim to the wording of its source.
Portable and whole-home dehumidifiers
ENERGY STAR certified models are available for both portable and whole-home dehumidifiers (ENERGY STAR).
Portable room dehumidifiers are typically used to dehumidify a single room or space and can be moved where they are needed (ENERGY STAR).
Whole-home dehumidifiers are typically installed to use the home's air ducts to dehumidify one or more rooms, and are often permanent (ENERGY STAR).
Whole-home dehumidifiers, when sized and installed properly, can save energy, increase indoor comfort, and prevent mildew and bacterial growth (ENERGY STAR).
The two types differ in how they are installed, so the choice starts with the space you need to dehumidify.
Efficiency and the energy factor
The energy efficiency of dehumidifiers is measured by integrated energy factor, in liters of water removed per kilowatt-hour (kWh) of energy consumed (ENERGY STAR).
In general, a higher integrated energy factor means a more efficient dehumidifier (ENERGY STAR).
Dehumidifiers originally qualified for the ENERGY STAR label in January, 2001 (ENERGY STAR).
When you compare models, compare the integrated energy factor of each one, since that is the measure the page uses.
Choosing the capacity
The capacity you need depends on the size of the space to be dehumidified and the conditions in the space without dehumidification (ENERGY STAR).
If the space being dehumidified typically falls below 65 degrees (F), ENERGY STAR says you may want a product specified for lower temperatures (ENERGY STAR).
Write down the size of the room and how damp it feels before you shop, so you can match the unit to the space.
A licensed contractor can size and install a whole-home unit, and can check the ductwork and the drain route before the unit goes in.
When a whole-home unit fits
If you live in a humid climate and have central air conditioning, an ENERGY STAR certified whole-home dehumidifier may be the right choice for you (ENERGY STAR).
These systems can be expensive, but they carry significant benefits for relatively well sealed homes with central air systems that see humidity readings above 55 percent consistently (ENERGY STAR).
The benefits described on the page apply to relatively well sealed homes with central air, so check the sealing of your home before you buy (ENERGY STAR).
Humidity targets for a home
The optimum relative humidity for a building is generally considered to be between 30 and 50 percent (ENERGY STAR).
Anything above the optimum humidity range may promote mold growth (ENERGY STAR).
Keep indoor relative humidity below 60 percent, and ideally between 30 and 50 percent (EPA).
While air conditioning use can reduce humidity, if indoor humidity is consistently above 60 percent, then a specific dehumidification strategy should be employed (EPA).
Controls and the built-in humidistat
All ENERGY STAR dehumidifiers include a built-in humidistat, a device that allows you to set the desired RH level (ENERGY STAR).
Once the room reaches the desired RH level, the dehumidifier cycles on and off automatically to maintain the level (ENERGY STAR).
Relative humidity is the amount of water vapor in the air compared with the greatest amount the air can hold at that temperature (ENERGY STAR).
Setup, cold rooms and moisture sources
Doors and windows to the space being dehumidified should be closed while the unit is running (ENERGY STAR).
Frost can form on the condensing coils if the air temperature drops below 65 degrees, and may negatively affect the performance of the product by causing the compressor to cycle on and off repeatedly without removing moisture from the air (ENERGY STAR).
Reducing sources of moisture can reduce the need for dehumidification (ENERGY STAR).
Use vent fans in bathrooms and kitchens to remove humidity where it starts (ENERGY STAR).
The key to mold control is moisture control (EPA).
Reduce indoor humidity to decrease mold growth by venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and dehumidifiers; increasing ventilation; and using exhaust fans whenever cooking, dishwashing, and cleaning (EPA).
Who to call for a whole-home installation
A whole-home unit should be sized and installed by a licensed HVAC contractor who can check the ductwork and the drain route.
Blume Mechanical Service repairs, installs and maintains HVAC and refrigeration equipment.
Frequently asked
What is integrated energy factor?
The energy efficiency of dehumidifiers is measured by integrated energy factor, in liters of water removed per kilowatt-hour (kWh) of energy consumed (ENERGY STAR). In general, a higher integrated energy factor means a more efficient dehumidifier (ENERGY STAR).
Which dehumidifier suits a humid home with central air?
If you live in a humid climate and have central air conditioning, an ENERGY STAR certified whole-home dehumidifier may be the right choice for you (ENERGY STAR). Whole-home dehumidifiers, when sized and installed properly, can save energy and increase indoor comfort (ENERGY STAR).
What humidity should a home aim for?
The optimum relative humidity for a building is generally considered to be between 30 and 50 percent (ENERGY STAR). Keep indoor relative humidity below 60 percent, and ideally between 30 and 50 percent (EPA).
Do the doors need to stay closed?
Doors and windows to the space being dehumidified should be closed while the unit is running (ENERGY STAR).
Can the air conditioner alone control humidity?
While air conditioning use can reduce humidity, if indoor humidity is consistently above 60 percent, a specific dehumidification strategy should be employed (EPA).
Does a dehumidifier prevent mold?
The key to mold control is moisture control (EPA). Anything above the optimum humidity range may promote mold growth (ENERGY STAR).
Related
- Carbon monoxide sources indoors and how to reduce exposure
- Formaldehyde in homes: sources and how to reduce exposure
- Whole-house fans in humid climates: what to know
Need an HVAC check on the air conditioner in your Florida home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: ENERGY STAR (U.S. EPA and DOE) — Dehumidifiers (https://www.energystar.gov/products/dehumidifiers) · U.S. Environmental Protection Agency — Biological Contaminants and Indoor Air Quality (https://www.epa.gov/indoor-air-quality-iaq/biological-contaminants-and-indoor-air-quality) · U.S. Environmental Protection Agency — What are ten things I need to know about mold? (https://www.epa.gov/mold/what-are-ten-things-i-need-know-about-mold)
Search Google for ENERGY STAR dehumidifier efficiency Florida