HVAC, explained
HVAC myths and what ENERGY STAR says about them
Several common beliefs about heating and cooling do not match ENERGY STAR guidance. ENERGY STAR says a bigger system isn't always better, and that a contractor should size the system to the house (ENERGY STAR). The same source says a dirty filter can increase energy costs and damage equipment (ENERGY STAR).
Homeowners often hear claims about furnaces, air conditioners and filters that are not what the guidance says. This page sets out the points that ENERGY STAR addresses directly. Nearly half of the energy used in your home goes to heating and cooling (ENERGY STAR), so the choices you make about this equipment matter. Each claim below names its source, so you can check it against the original page. The page does not cover every belief you may hear.
Bigger is not always better
ENERGY STAR says a bigger system isn't always better (ENERGY STAR). A contractor should size the heating and cooling system based on the size of your house, level of insulation, and windows (ENERGY STAR). Oversized equipment may cycle too frequently, resulting in less comfort and a shortened lifespan (ENERGY STAR).
The sizing step is part of the installation, so ask about it before the work starts. Keep the sizing details with the written proposal so you can compare bids on the same basis.
Filters need regular checks
Check your filter every month, especially during heavy use months (winter and summer) (ENERGY STAR). At a minimum, change the filter every 3 months (ENERGY STAR). A dirty filter can increase energy costs and damage your equipment, leading to early failure (ENERGY STAR).
The three-month change is the minimum the source gives (ENERGY STAR). Heavy use months are winter and summer, according to the same guidance (ENERGY STAR). Check the filter on a set date each month so the minimum is never the only guide.
A yearly tune-up is worth scheduling
ENERGY STAR compares a yearly tune-up of heating and cooling to a car tune-up (ENERGY STAR). The source says a yearly tune-up can improve efficiency and comfort (ENERGY STAR). ENERGY STAR advises that a contractor do annual pre-season check-ups to keep the system at peak performance (ENERGY STAR).
Dirty coils reduce the system's ability to cool your home and cause the system to run longer, increasing energy costs (ENERGY STAR). A yearly visit is the place to have the coils looked at by a professional.
Ducts are often big energy wasters
Ducts that move air to-and-from a forced air furnace, central air conditioner, or heat pump are often big energy wasters (ENERGY STAR). Leaky ducts can pull particles and air from attics, crawl spaces and basements and distribute them throughout your house (ENERGY STAR).
Ask the contractor to inspect the ducts that run through the attic, crawl space and basement during the visit.
Installation quality affects results
Improper installation can reduce system efficiency, costing more on utility bills and possibly shortening equipment life (ENERGY STAR). Airflow problems can reduce your system's efficiency (ENERGY STAR).
Airflow and installation questions are answered most reliably by a licensed contractor who can measure the system on site. Keep the installation paperwork with the equipment records.
Refrigerant charge is not a guess
Too much or too little refrigerant will make your system less efficient, increasing energy costs and reducing the life of the equipment (ENERGY STAR). The same maintenance guidance covers central air conditioners, the system type the source describes in its checklist (ENERGY STAR).
Ask a licensed contractor to check and adjust the refrigerant level. Ask the technician to record the refrigerant level and any adjustment in the service report.
The lowest price is not always the right value
A lowest price may not give you the most value if the equipment is not the most efficient, because your energy costs will be higher (ENERGY STAR). A bigger system isn't always better, so check whether a proposal is oversized for the house (ENERGY STAR).
Compare each proposal on sizing, efficiency and the work it includes, not on the total alone. Get the proposal in writing before work starts.
Where to get a check on your system
Each claim above names its source, so you can confirm it on the original page. For any other question about your equipment, check the equipment manual or ask a licensed contractor. Blume Mechanical Service repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties, and is brand-agnostic.
Frequently asked
Is a bigger air conditioner better for a Florida home?
ENERGY STAR says a bigger system isn't always better (ENERGY STAR). It says the system should be sized to the size of the house, its insulation and its windows (ENERGY STAR).
Can I change my air filter once a year?
ENERGY STAR says to change the filter at a minimum every 3 months (ENERGY STAR). It also says to check the filter every month during heavy use months, winter and summer (ENERGY STAR).
Is a yearly heating and cooling tune-up worth it?
ENERGY STAR says a yearly tune-up can improve efficiency and comfort (ENERGY STAR). It advises annual pre-season check-ups by a contractor (ENERGY STAR).
Do ducts really affect energy use?
ENERGY STAR says ducts that move air to and from a forced air furnace, central air conditioner or heat pump are often big energy wasters (ENERGY STAR). Leaky ducts can also pull particles and air from attics, crawl spaces and basements (ENERGY STAR).
Does the lowest bid save money?
ENERGY STAR says a lowest price may not give you the most value if the equipment is not the most efficient, because energy costs will be higher (ENERGY STAR). Compare the proposals on efficiency as well as price.
Can a homeowner add refrigerant if the system seems weak?
ENERGY STAR says too much or too little refrigerant makes a system less efficient (ENERGY STAR). Ask a licensed contractor to check the refrigerant level.
Related
- How to connect a Honeywell thermostat to Wi-Fi
- Indoor Air Quality at Home: How to Monitor It and How to Improve It
- What Is HVAC? The Parts of a Florida Home's System
Need an HVAC check on your Florida home? Blume Mechanical Service (license CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: ENERGY STAR (U.S. EPA and DOE) — Heat & Cool Efficiently (https://www.energystar.gov/saveathome/heating-cooling) · ENERGY STAR (U.S. EPA and DOE) — 10 Tips for Hiring a Heating and Cooling Contractor (https://www.energystar.gov/saveathome/heating-cooling/10-tips-hiring) · ENERGY STAR (U.S. EPA and DOE) — HVAC Quality Installation (https://www.energystar.gov/saveathome/heating-cooling/hvac-quality-installation) · ENERGY STAR (U.S. EPA and DOE) — Maintenance Checklist (https://www.energystar.gov/saveathome/heating-cooling/maintenance-checklist) · ENERGY STAR (U.S. EPA and DOE) — When is it time to replace? (https://www.energystar.gov/saveathome/heating-cooling/replace)