Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Flood drying timeline and how to check dryness

EPA says it is important to dry water-damaged areas and items within 24-48 hours to prevent mold growth (EPA). Drying can take a long time, usually several days to weeks (EPA). Keep the air moving even after things look dry, and do not seal or paint wet surfaces until the materials are completely dry on the inside (EPA).

This page covers the drying timing EPA describes after a flood, the conditions that slow drying, and the checks to make before you seal, paint or replace materials. Each fact names the EPA page it comes from, so you can read the original wording.

Why drying starts in the first 24 hours

EPA says it is important to dry water-damaged areas and items within 24-48 hours to prevent mold growth (EPA).

Mold can grow on wood, drywall, carpet and furniture if they remain wet for more than 24 hours (EPA).

If wet or damp materials are dried 24-48 hours after a leak or spill, in most cases mold will not grow (EPA).

The key to mold control is moisture control (EPA). Mold spores will not grow if moisture is not present (EPA).

Flood water can make the air in your home unhealthy (EPA).

The next sections cover how long drying takes and what can slow it down. Keep a simple written log of each room, the materials in it, and the date each one was cleaned, because those notes make it easier to follow the checks below.

How long drying usually takes

Drying can take a long time, usually several days to weeks (EPA).

Even after things look dry, EPA says to keep the air moving with open doors and windows and any equipment you have available (EPA).

The EPA sentences give a general estimate, not a schedule for any particular house. Plan your checks around the materials in your home rather than a calendar date. EPA names wood, drywall, carpet and furniture as examples of materials that can grow mold after more than 24 hours of wetness, so inspect those items first in each room (EPA).

Conditions that slow drying

If the air outside is very humid and warm, it can slow down the drying process (EPA).

Most HVAC systems cannot dry out a home by themselves when the humidity is very high after a flood (EPA).

A reading from a moisture meter is still the better check for each material. Record each reading with the room and the material it came from, so the numbers stay useful later.

Fans, dehumidifiers and open windows

If you have power, you can set up fans, dehumidifiers, or heaters throughout the house to speed up the drying process (EPA).

If it is safe to do so, leave outside doors and windows open to keep air moving through the house as you clean and dry it out (EPA).

While cleaning, open doors and windows, if possible, to increase ventilation and help dry your home (EPA).

Open inside doors and cabinets, and remove drawers, shelves, and built-in furniture (such as cabinets) to allow hidden surfaces to dry (EPA).

Keep the HVAC system out of the drying plan

If any part of your HVAC system was affected by the flood, do not use it to help dry out your house (EPA).

Cleaning and drying your HVAC system can be complicated (EPA).

Blume Mechanical Service repairs, installs and maintains HVAC and refrigeration equipment.

Write down the date each affected room was first opened to air, so you can compare the drying progress with the EPA timing described above and report it clearly to whoever checks the system.

Checks before sealing, painting or flooring

EPA says not to seal flooded areas such as wall cavities, and not to paint or seal wet surfaces until the materials are completely dry on the inside (EPA).

A moisture meter can help you determine whether materials such as walls, cabinets, and flooring are dry and ready for refinishing (EPA).

To prevent mold growth, you should be sure your foundation is dry before you replace the flooring (EPA).

Ask your contractor or inspector which meter reading they will accept before work continues. Get that answer in writing before you approve the next stage of repairs, and keep the readings with your records for the home.

Materials, hidden mold and finished work

You can usually clean and dry materials that do not soak up water (EPA).

Mold may be hidden in places such as the back side of drywall, wallpaper, or paneling, the top side of ceiling tiles, the underside of carpets and pads (EPA).

You must have completely fixed the water or moisture problem before the cleanup or remediation can be considered finished (EPA).

Frequently asked

How soon should flood-wet materials be dried?

EPA says it is important to dry water-damaged areas and items within 24-48 hours to prevent mold growth (EPA). Mold can grow on wood, drywall, carpet and furniture if they remain wet for more than 24 hours (EPA).

How long does drying take after a flood?

Drying can take a long time, usually several days to weeks (EPA). EPA says to keep the air moving even after things look dry (EPA).

Can the HVAC system help dry the house?

If any part of your HVAC system was affected by the flood, do not use it to help dry out your house (EPA). Most HVAC systems cannot dry out a home by themselves when the humidity is very high after a flood (EPA).

How can I tell if a wall or floor is dry?

A moisture meter can help you determine whether materials such as walls, cabinets, and flooring are dry and ready for refinishing (EPA). Ask your contractor or inspector which reading they will accept.

Should I paint or seal right after a flood?

EPA says not to paint or seal wet surfaces until the materials are completely dry on the inside (EPA). Do not seal flooded areas such as wall cavities (EPA).

Who should clean and dry the HVAC system after flooding?

Cleaning and drying your HVAC system can be complicated (EPA). Ask a licensed contractor to check the system before you rely on it, and ask what that check covers in writing.

Related

Need an HVAC check after a flood in your Tampa Bay home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Sources: U.S. EPA — Flood Cleanup to Protect Indoor Air and Your Health (https://www.epa.gov/emergencies-iaq/flood-cleanup-protect-indoor-air-and-your-health) · U.S. EPA — A Brief Guide to Mold, Moisture and Your Home (https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home)

Search Google for flood drying timeline