Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

ENERGY STAR ceiling fans: efficiency, install and use

ENERGY STAR certified ceiling fans save energy and help protect the environment by reducing greenhouse gas emissions (ENERGY STAR). Ceiling fan performance and energy savings rely heavily on the proper installation and use of the ceiling fan (ENERGY STAR). Additional energy savings could be realized by adjusting the thermostat when using the ceiling fan (ENERGY STAR).

This page covers the ENERGY STAR points on what to look for, how to install and balance a fan, how to run it with and without air conditioning, and which controls match it. Each fact names its source, and where ENERGY STAR gives no figure, this page gives none either.

What the ENERGY STAR label covers

ENERGY STAR certified ceiling fans save energy and help protect the environment by reducing greenhouse gas emissions (ENERGY STAR). In addition to the ENERGY STAR label, there are other items to consider when buying and installing a ceiling fan (ENERGY STAR).

The efficiency metric is weighted and based on fan performance at multiple speeds and in stand-by mode, expressed in cubic feet per minute per watt (CFM/W) (ENERGY STAR).

The label is one part of the choice. The installation and the controls matter as well, as the next sections explain.

Installing the electrical box and mounting

Ceiling fan performance and energy savings rely heavily on the proper installation and use of the ceiling fan (ENERGY STAR). Read and understand the manufacturer's instructions before you install a ceiling fan (ENERGY STAR).

Use the appropriate UL-listed metal box, marked “For Use With Ceiling Fans” (ENERGY STAR). The outlet box houses all wiring needed to operate and connect the ceiling fan (ENERGY STAR).

If you are replacing a ceiling fixture, you will most likely need to replace the electrical box (ENERGY STAR).

If possible, anchor the ceiling fan to a ceiling joist (ENERGY STAR). If the joist is not in the center of the room, a special mounting bracket with spiked ends should be installed between joists (ENERGY STAR).

Ceiling fans can weigh as much as 50 pounds (ENERGY STAR).

If you are unsure about the box or the mounting, ask a licensed electrician to check it before you hang the fan.

Balance and wobble

All fan blades should be balanced before shipment, but a wobbly fan after installation can be fixed (ENERGY STAR). If a fan wobbles, first make sure all connections are properly aligned and tightly fastened (ENERGY STAR).

Check blade alignment by holding a yardstick vertically along the edges, and you may be able to gently bend a misaligned blade holder back into place (ENERGY STAR). If all blades are aligned, a balancing kit can be used to pinpoint the problem (ENERGY STAR).

Running the fan in summer

Turn off the ceiling fan to save energy when the room is unoccupied (ENERGY STAR).

In the summer, use the ceiling fan in the counterclockwise direction (ENERGY STAR). Standing directly under the ceiling fan, you should feel a cool breeze (ENERGY STAR).

The airflow creates a wind-chill effect, making you feel cooler (ENERGY STAR).

Running the fan with air conditioning

Additional energy savings could be realized by adjusting the thermostat when using the ceiling fan (ENERGY STAR).

For the air conditioner itself, a licensed technician can check its settings.

Running the fan in winter

In the winter, reverse the motor and run the fan at low speed in the clockwise direction (ENERGY STAR). Running the fan in winter produces a gentle updraft, which forces warm air near the ceiling down into the occupied space (ENERGY STAR).

Check the manual for the reverse-switch position on your model.

Controls, dimmers and light kits

Standard controls include a pull chain attached to the housing and a motor reversing switch on the lower housing (ENERGY STAR). Using a conventional dimmer switch to run the fan could cause the ceiling fan motor to hum (ENERGY STAR).

With an ENERGY STAR certified fan and a dimmer, check that the packaging says the lighting is dimmable (ENERGY STAR). Look for controls that match the fan's maximum amps, number of speeds, total lamp wattage and brand (ENERGY STAR).

Light kit compatibility should be found on the product packaging (ENERGY STAR). Most ceiling fans have a 3-speed switch in the housing (ENERGY STAR).

Ceiling fan light kits can be purchased three ways: integrated into the fan, included with the fan at the time of purchase, or sold separately (ENERGY STAR).

Low ceilings and hugger fans

Hugger fans have the lowest point on the blades less than or equal to 10 inches from the ceiling (ENERGY STAR). Hugger ceiling fans can be safely installed on low ceilings (ENERGY STAR).

Check the ceiling height in the room before you choose a fan type, and confirm the choice with the product packaging.

Frequently asked

Does the ENERGY STAR label cover everything?

ENERGY STAR certified ceiling fans save energy and help protect the environment by reducing greenhouse gas emissions (ENERGY STAR). In addition to the ENERGY STAR label, there are other items to consider when buying and installing a ceiling fan (ENERGY STAR).

How much does a fan weigh?

Ceiling fans can weigh as much as 50 pounds (ENERGY STAR). If possible, anchor the ceiling fan to a ceiling joist (ENERGY STAR).

Does a fan help with air conditioning?

Additional energy savings could be realized by adjusting the thermostat when using the ceiling fan (ENERGY STAR). The airflow creates a wind-chill effect, making you feel cooler (ENERGY STAR).

Which direction should the fan turn?

In the summer, use the ceiling fan in the counterclockwise direction (ENERGY STAR). In the winter, reverse the motor and run the fan at low speed in the clockwise direction (ENERGY STAR).

Can I use a dimmer with the fan?

Using a conventional dimmer switch to run the fan could cause the ceiling fan motor to hum (ENERGY STAR). With an ENERGY STAR certified fan and a dimmer, check that the packaging says the lighting is dimmable (ENERGY STAR).

Can a fan go in a low ceiling room?

Hugger ceiling fans can be safely installed on low ceilings (ENERGY STAR). Hugger fans have the lowest point on the blades less than or equal to 10 inches from the ceiling (ENERGY STAR).

Related

For the air conditioning side of your home, Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Sources: ENERGY STAR (U.S. EPA and DOE) — Ceiling Fans (https://www.energystar.gov/products/ceiling_fans) · ENERGY STAR (U.S. EPA and DOE) — Ceiling Fan Installation and Usage Tips (https://www.energystar.gov/products/lighting_fans/ceiling_fans/installation_usage_tips) · ENERGY STAR (U.S. EPA and DOE) — Ceiling Fan Accessories and Purchasing Choices (https://www.energystar.gov/products/lighting_fans/ceiling_fans/accessories_purchasing_choices) · ENERGY STAR (U.S. EPA and DOE) — Ceiling Fans Key Product Criteria (https://www.energystar.gov/products/lighting_fans/ceiling_fans/ceiling_fans_key_product_criteria)

Search Google for ENERGY STAR ceiling fans