Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Low-cost indoor air quality monitors: what they measure

A low-cost air pollution monitor uses one or more sensors to detect and report specific pollutants or environmental factors such as temperature and humidity (EPA). EPA says these monitors do not give a complete representation of indoor air quality (EPA). A 2018 Berkeley Lab study found that all seven consumer monitors it tested substantially underreported or missed events in which the emitted mass was particles smaller than 0.3 micrometers (Lawrence Berkeley National Laboratory).

This page explains what low-cost indoor air quality monitors measure and where their readings stop being reliable. It draws on EPA guidance, EPA's frequently asked questions about air sensors, and a Berkeley Lab study of indoor monitors. Read the sections in order, or go straight to the question that matches your situation. The FAQ at the end repeats the key findings with their sources.

What a low-cost monitor is

Low-cost air pollution monitors use one or more sensors and other components to detect, monitor and report on specific air pollutants like particulate matter (PM) or carbon dioxide and/or environmental factors such as temperature and humidity (EPA).

Most low-cost air pollution monitors sold in the U.S. are designed to detect gases or particles in the air such as particulate matter (PM), radon, carbon monoxide (CO), carbon dioxide (CO 2 ), formaldehyde, volatile organic compounds (VOCs), or environmental factors such as temperature and humidity (EPA).

Some monitors show a number, color or graphic as an indicator of the concentration their sensors are designed to detect (EPA). The cost of a monitor does not necessarily indicate how well it will perform (EPA).

What a monitor does not cover

It is important to highlight that there is currently limited information on how well some low-cost air pollution monitors detect pollutants indoors (EPA).

In addition, low-cost air pollution monitors do not give a complete representation of indoor air quality and only detect contaminants or environmental factors for which they are designed (EPA).

For example, a monitor that only is designed to measure PM would not alert you to the presence of other potentially harmful pollutants like radon or carbon monoxide (EPA).

Alerts and alert levels

It is important to understand that there are currently no widely accepted air concentration limits for most pollutants indoors (EPA). Levels that trigger an alert are determined by the manufacturer of the monitor (EPA).

Unlike alerts from carbon monoxide (CO) alarms or smoke detectors, alerts from low-cost air pollution monitors are not designed to warn of the potential for immediate danger to your health or life (EPA).

Accuracy and testing

There is limited information on the accuracy and precision of low-cost air pollutant monitors currently available in the marketplace (EPA).

Generally, these monitors have been evaluated based on outdoor conditions, which may not reflect use indoors (EPA).

There are currently no widely accepted indoor performance criteria used for most low-cost air pollutant monitors (EPA).

Air sensors have limitations, including occasional questionable data points and a bias that can systematically over- or under-estimate concentrations (EPA).

Heat, humidity and sensor life

Low and high temperatures, as well as high humidity levels, may cause inaccurate readings (EPA). Air sensors may be inaccurate and may require field calibration to give more accurate data (EPA).

Many air sensors for gases become less sensitive to the target pollutant over time, so their readings become less accurate (EPA).

Some air sensors are only usable for one to two years (EPA). All air pollutant monitors have a limited lifespan and can become less reliable over time (EPA).

Many air sensors do not display data on a screen in real time (EPA).

Outdoor monitors and reference methods

While a low-cost air pollution monitor may provide a way to get information about specific pollutants in air, that information is not equivalent to data from the EPA regulatory monitoring network (EPA).

The federal reference and equivalent method monitors are considered the gold standard for air quality monitoring, and they are different devices from the indoor low-cost monitors (EPA).

Currently, there are no equivalent reference methods or air monitoring networks for indoor air (EPA).

EPA scientists evaluate some air sensors and report the results, but EPA does not make endorsements or recommendations for their use (EPA).

What a 2018 Berkeley Lab study found

All 7 of the consumer and both research monitors substantially underreported or missed events for which the emitted mass was made of particles smaller than 0.3 micrometers in diameter (Lawrence Berkeley National Laboratory).

Data from the research monitors and four consumer monitors, AirBeam, AirVisual, Foobot and Purple Air, were time correlated and within a factor of 2 of the estimated mass concentrations for most sources (Lawrence Berkeley National Laboratory).

The study dates from 2018, so current products may differ from the models it tested (Lawrence Berkeley National Laboratory).

Where HVAC service fits

Blume Mechanical Service repairs, installs and maintains HVAC and refrigeration equipment, and it is brand-agnostic.

Frequently asked

What do low-cost indoor air monitors measure?

EPA says most low-cost air pollution monitors sold in the U.S. are designed to detect gases or particles, such as particulate matter (PM), radon, carbon monoxide (CO), carbon dioxide (CO 2 ), formaldehyde and volatile organic compounds (VOCs) (EPA). Some also measure temperature and humidity (EPA).

Can an air monitor replace a carbon monoxide alarm?

EPA says alerts from low-cost air pollution monitors are not designed to warn of the potential for immediate danger to your health or life (EPA). EPA contrasts them with carbon monoxide alarms and smoke detectors (EPA).

Are monitor readings as good as EPA outdoor monitors?

EPA says information from a low-cost monitor is not equivalent to data from the EPA regulatory monitoring network (EPA). The federal reference and equivalent method monitors are considered the gold standard for air quality monitoring (EPA).

Do temperature and humidity affect sensor readings?

EPA says low and high temperatures, as well as high humidity levels, may cause inaccurate readings (EPA). EPA's frequently asked questions say air sensors may require field calibration (EPA).

How long do air sensors last?

EPA says some air sensors are only usable for one to two years (EPA). All air pollutant monitors have a limited lifespan and can become less reliable over time (EPA).

Does a monitor show health limits?

EPA says there are currently no widely accepted air concentration limits for most pollutants indoors, so alert levels are determined by the manufacturer of the monitor (EPA).

Related

Need an HVAC check on the air handler or ductwork in your Florida home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Sources: U.S. Environmental Protection Agency (EPA) — Low-Cost Air Pollution Monitors and Indoor Air Quality (https://www.epa.gov/node/234209) · U.S. Environmental Protection Agency (EPA) — Frequent Questions About Air Sensors (https://www.epa.gov/node/242697) · Lawrence Berkeley National Laboratory — Response of consumer and research grade indoor air quality monitors to residential sources of fine particles (https://indoor.lbl.gov/publications/response-consumer-and-research-grade)

Search Google for indoor air quality monitors