HVAC, explained
Energy-efficient home design in hot-humid climates
The South Carolina Energy Office says a new home or extensive remodel requires a Whole-House Systems Approach to optimize energy efficiency (South Carolina Energy Office). Modern air conditioning systems are very effective at reducing temperature but less effective at removing moisture from the air (DOE). Building America field projects in Florida reported results for specific homes, not for every home in the state (DOE).
A hot-humid climate puts two loads on a house: heat from the sun and moisture from the air. This page explains what federal and state sources say about designing a home as one connected system, what Florida field projects reported, and what to ask a designer or builder. Each fact names the organisation that published it, so you can tell which findings come from a specific project and which describe design in general.
Design the house as one system
Designing for a hot-humid climate means looking at the whole house, not one part at a time. The South Carolina Energy Office calls this approach the Whole-House Systems Approach (South Carolina Energy Office). For a new home or an extensive remodel, optimizing efficiency requires that approach (South Carolina Energy Office).
The approach considers occupant behavior, site conditions and climate, in addition to other variables that affect energy use (South Carolina Energy Office).
The sections below move from the general design approach to humidity, field projects and the questions to ask.
Start with an energy audit
In an existing house, the first step is a home energy audit to find out how the home uses energy (South Carolina Energy Office).
The Home Energy Score rates a home's current efficiency and lists improvements and potential savings (South Carolina Energy Office).
Before you design a new home or remodel, consider investing in energy efficiency (South Carolina Energy Office).
What Building America guidance covers
DOE's Building America program has developed practices and case studies for whole-house energy performance in hot-humid climates (DOE).
Building America measure sets are meant for builders to achieve energy savings (DOE).
The hot-humid measure set meets and exceeds DOE Efficient New Homes program requirements (DOE).
These measure sets are written for builders, so a homeowner should ask which measures apply to a specific house.
Humidity needs its own check
Modern air conditioning systems are very effective at reducing temperature but less effective at removing moisture from the air (DOE).
Newer tighter homes have less heat gain in cooling season, but moisture and humidity loads tend to remain about the same (DOE).
Home Innovation Research Labs worked with manufacturers to increase the dehumidification capability of central, ducted HVAC systems (DOE).
The research used modified control settings and lower system airflows to optimize dehumidification (DOE).
The work resulted in controlled indoor humidity using conventional equipment that is easy to set up (DOE).
What Florida field projects reported
The DOE reports results for two Gainesville zero energy homes, which describe those homes only (DOE).
In a Palm Beach County retrofit, PNNL and the Florida Solar Energy Center aimed to cut one home's utility bills (DOE).
PNNL and partners helped a Cape Coral builder achieve HERS 15 with PV, or HERS 65 without PV, on one Florida home (DOE).
PNNL and the Florida Solar Energy Center helped Habitat for Humanity build three prototype homes (DOE).
A coastal Florida Habitat home used insulated concrete form walls, PV and solar water heating (DOE).
In Melbourne, Florida, researchers worked on best practices for renovating distressed homes (DOE).
Each of these is one project with its own home, so treat the figures as that project's results.
Retrofits and rehabs
For one gut rehab, PNNL and the Florida Solar Energy Center added insulation, new HVAC, sealed ducts and new lighting (DOE).
One builder project used energy-efficient heat pumps and programmable thermostats with humidity controls (DOE).
Building Science Corporation worked on a cost-effective design for moving the HVAC system into conditioned space for a Houston builder (DOE).
A rehab or retrofit is a different job from a new build, so ask which parts of a project apply to your house.
Questions to ask a designer or builder
Ask the designer which measures came from a whole-house review of the home, and which variables were compared.
Ask how the design controls indoor humidity, and which equipment and settings do that job.
Ask for the energy audit or Home Energy Score results before you choose upgrades, and keep them with the plans.
Blume Mechanical Service, license CAC-1822618, repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties.
Equipment check with a contractor
Ask a licensed HVAC contractor to check the equipment that will serve the home, and compare written proposals on the same points.
Frequently asked
What is a whole-house approach to home design?
The South Carolina Energy Office says optimizing efficiency for a new home requires a Whole-House Systems Approach (South Carolina Energy Office). The approach considers occupant behavior, site conditions and climate, in addition to other variables that affect energy use (South Carolina Energy Office).
Should I start with an energy audit?
In an existing house, the first step is a home energy audit to find out how the home uses energy (South Carolina Energy Office). The Home Energy Score rates a home's current efficiency and lists improvements and potential savings (South Carolina Energy Office).
Does air conditioning remove humidity well?
Modern air conditioning systems are very effective at reducing temperature but less effective at removing moisture from the air (DOE). Newer tighter homes have less heat gain in cooling season, but moisture and humidity loads tend to remain about the same (DOE).
Did a Florida project measure energy savings?
The DOE reports results for two Gainesville zero energy homes, which describe those homes only (DOE). These were two homes in one project, so the results do not describe every Florida home.
What are Building America measure sets?
Building America measure sets are meant for builders to achieve energy savings (DOE). These measure sets are written for builders, so ask which measures apply to your house.
What equipment did one builder project use for humidity?
One builder project used energy-efficient heat pumps and programmable thermostats with humidity controls (DOE). Ask your builder which equipment and settings control humidity in your home.
Related
- Attic hatch insulation and air sealing steps
- How to read your electric bill in kWh
- Window shading and solar heat gain at home
Need an HVAC check for the air conditioner in your Florida home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: U.S. Department of Energy — Guides and Case Studies for Hot-Humid Climates (https://www.energy.gov/cmei/buildings/guides-and-case-studies-hot-humid-climates) · U.S. Department of Energy — Advanced HVAC Humidity Control for Hot-Humid-Climates (https://www.energy.gov/cmei/buildings/advanced-hvac-humidity-control-hot-humid-climates-0) · South Carolina Energy Office — Energy-Efficient Home Design (https://energysaver.sc.gov/your-home/design/energy-efficient-home-design)
Search Google for energy efficient home design hot humid climate