Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Attic hatch insulation and air sealing steps

ENERGY STAR says to finish the attic hatch by sealing it with self-sticking weatherstripping (ENERGY STAR). It also says to cut fiberglass or rigid foam board the same size as the hatch and attach it to the back (ENERGY STAR). Some attics have vermiculite insulation, which may contain asbestos, so ENERGY STAR advises testing it before disturbing it (ENERGY STAR).

An attic access hatch is one of the openings between your living space and the attic. This page explains what ENERGY STAR says about weatherstripping the hatch, insulating its back, and handling pull-down stairs and attic doors. It also covers the safety checks ENERGY STAR lists before you start work in an attic.

Seal the hatch with weatherstripping

ENERGY STAR says to finish up by sealing the access hatch with self-sticking weatherstripping (ENERGY STAR).

If the hatch sits directly on the moldings, ENERGY STAR advises adding 2-1/2 inch wide stops around the opening (ENERGY STAR).

The stops give the weatherstrip a wider surface and room for hook-and-eye fasteners (ENERGY STAR).

ENERGY STAR says to place the screw eyes so the weatherstrip is slightly compressed when the hooks are latched (ENERGY STAR).

After you latch the hatch, check by hand that the weatherstrip touches the frame all the way around.

Insulate the back of the hatch

ENERGY STAR says to cut fiberglass or rigid foam board the same size as the attic hatch and attach it to the back (ENERGY STAR).

Ask your installer or supplier for the insulation value of the board before you buy it, so the hatch matches the rest of the attic insulation.

Pull-down stairs and attic doors

Pull-down attic stairs or an attic door should be weatherstripped at the edges and given rigid foam board on the back (ENERGY STAR).

ENERGY STAR says to treat an attic door like a door to the outside (ENERGY STAR).

Pre-made insulated attic stair covers are sold at home improvement centers and online (ENERGY STAR).

A stair cover is a product choice, so compare the sealing edge and the insulation value of each cover before you buy.

Why attic air sealing matters

The attic is usually where a home has some of the largest opportunities to save energy (ENERGY STAR).

Air sealing in the attic can stop many major air leaks and help maintain the desired temperature throughout the home (ENERGY STAR).

Sealing air leaks and adding insulation can help your home be more comfortable and energy efficient (ENERGY STAR).

Small fixes such as hatch weatherstripping are part of the same sealing work as larger attic projects.

Utility rebates and incentives

Many local utilities may offer rebates for a professional energy assessment and some sealing and insulation projects (ENERGY STAR).

ENERGY STAR advises contacting the utility before a project to see what incentives apply (ENERGY STAR).

Simple fixes include weatherstripping doors and caulking windows, while bigger jobs can include attic sealing and insulation (ENERGY STAR).

Ask your electric utility whether a rebate applies to your home and what paperwork it needs, before you start the work.

Check for hazards before you start

ENERGY STAR advises hiring a professional to correct certain attic conditions before the work proceeds (ENERGY STAR).

Knob and tube wiring installed before 1930 can be a fire hazard when in contact with insulation (ENERGY STAR).

Some attics have vermiculite insulation, which may contain asbestos (ENERGY STAR).

ENERGY STAR says not to disturb vermiculite insulation until an approved lab has tested it (ENERGY STAR).

Contact your local health department for the name of an approved lab.

Working in a hot attic

Attics heat up as the day goes on, so ENERGY STAR advises starting attic work early in hot weather (ENERGY STAR).

Wear a lightweight disposable coverall, gloves and hat to keep itchy and irritating insulation off your skin (ENERGY STAR).

Attic air sealing may be a good DIY project if the attic is accessible and the homeowner enjoys bigger projects (ENERGY STAR).

A hatch that is hard to reach or a crowded attic is a reason to call a professional, as the ENERGY STAR guidance suggests.

Questions to ask before hiring or buying

Ask the installer whether the hatch rests directly on the moldings, since ENERGY STAR's stop method applies in that case (ENERGY STAR).

Ask the utility whether an incentive applies to a home energy assessment or sealing work.

Ask for the insulation value and the weatherstrip type in writing before you approve the work.

Blume Mechanical Service, license CAC-1822618, repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties.

If ductwork or an air handler sits in the attic, a licensed HVAC technician can check that equipment during the same visit.

Frequently asked

How do I seal an attic hatch?

ENERGY STAR says to finish up by sealing the access hatch with self-sticking weatherstripping (ENERGY STAR). If the hatch rests directly on the moldings, add 2-1/2 inch wide stops around the opening (ENERGY STAR).

Should I insulate the back of the hatch?

ENERGY STAR says to cut fiberglass or rigid foam board the same size as the attic hatch and attach it to the back (ENERGY STAR). Check the insulation value of the board with your installer before you buy it.

What about pull-down attic stairs?

Pull-down attic stairs or an attic door should be weatherstripped at the edges and given rigid foam board on the back (ENERGY STAR). ENERGY STAR says to treat an attic door like a door to the outside (ENERGY STAR).

Is vermiculite insulation a concern?

Some attics have vermiculite insulation, which may contain asbestos (ENERGY STAR). ENERGY STAR says not to disturb vermiculite insulation until an approved lab has tested it (ENERGY STAR).

Can a utility help pay for attic air sealing?

Many local utilities may offer rebates for a professional energy assessment and some sealing and insulation projects (ENERGY STAR). ENERGY STAR advises contacting the utility before a project to see what incentives apply (ENERGY STAR).

Can I do attic air sealing myself?

Attic air sealing may be a good DIY project if the attic is accessible and the homeowner enjoys bigger projects (ENERGY STAR). ENERGY STAR advises hiring a professional to correct certain attic conditions before the work proceeds (ENERGY STAR).

Related

Need an HVAC check on equipment in or near your attic? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Sources: ENERGY STAR — Sealing the Attic Hatch or Door (https://www.energystar.gov/saveathome/seal_insulate/do-it-yourself-guide/sealing-air-leaks-attic/attic-hatch-or-door) · ENERGY STAR — Attic Air Sealing Project (https://www.energystar.gov/saveathome/seal_insulate/attic-air-sealing-project) · ENERGY STAR — Seal and Insulate with ENERGY STAR (https://www.energystar.gov/saveathome/seal_insulate)

Search Google for attic hatch insulation and air sealing