HVAC, explained
Fire and furnace safety: can a furnace catch on fire?
A gas-fired furnace generally will not cause a fire when it breaks down, if it is correctly installed, properly maintained and properly used (University of Arkansas Extension). The statement describes furnaces that meet all three conditions, so installation, maintenance and use all matter (University of Arkansas Extension). The EPA says oil and gas furnaces should be inspected by a trained professional at the beginning of every heating season (EPA).
Many homeowners ask whether a furnace can catch fire. This page sets out what the University of Arkansas Extension, the University of Missouri Extension, the EPA and ENERGY STAR say about furnace fire risk, carbon monoxide and routine upkeep. Each statement names its source, so you can tell which organisation said what.
What the sources say about furnace fires
A gas-fired furnace generally will not cause a fire when it breaks down, if it is correctly installed, properly maintained and properly used (University of Arkansas Extension). The condition in that sentence is the important part. The statement describes furnaces that meet all three conditions, not every furnace (University of Arkansas Extension).
The same page names heating equipment as a cause of home fire deaths (University of Arkansas Extension).
Keep the area around the furnace clear
The University of Missouri Extension says to keep the area around the furnace housing free of dust, lint and litter (University of Missouri Extension).
The University of Arkansas Extension says to pay attention to gas furnaces, particularly heat exchangers and vents for flue gases (University of Arkansas Extension).
Filters and dust
The University of Missouri Extension says to check furnace filters every two months during the heating season (University of Missouri Extension). The same source says to clean or replace them as needed (University of Missouri Extension).
ENERGY STAR says to inspect, clean or change air filters once a month in a central air conditioner, furnace or heat pump (ENERGY STAR). ENERGY STAR also says a dirty filter can increase energy costs and damage equipment, leading to early failure (ENERGY STAR).
The two sources give different filter intervals. Follow the manufacturer's manual for your furnace, and ask your heating contractor which schedule fits your system.
Annual inspection and cleaning
The EPA says fuel-burning appliances, including oil and gas furnaces, should be inspected by a trained professional at the beginning of every heating season (EPA). The University of Arkansas Extension says heating equipment and chimneys should be cleaned and inspected yearly by a qualified professional (University of Arkansas Extension).
The inspection is a job for a qualified professional. A homeowner can keep the furnace area clear between visits, but the inspection itself belongs to the technician.
Flues, vents and chimneys
The EPA advises having a qualified technician inspect fuel-burning appliances and chimneys so nothing blocks fumes from being vented out of the house (EPA).
The University of Arkansas Extension says to pay attention to gas furnaces, particularly heat exchangers and vents for flue gases (University of Arkansas Extension). A cracked or blocked vent is a reason to call a licensed contractor, not a reason to delay the call.
Carbon monoxide from a furnace
The EPA says that if no one has symptoms, the home should be ventilated with fresh air, and potential sources of carbon monoxide turned off, including the oil or gas furnace (EPA). The same EPA page lists gas water heaters, gas ranges and gas dryers as other sources to turn off (EPA).
Carbon monoxide is a separate question from fire. The EPA page is about carbon monoxide poisoning, so read its steps as carbon monoxide steps, not fire steps.
Pilot light and flame
The University of Missouri Extension says a gas furnace's pilot light should show a clean, blue flame (University of Missouri Extension). The same source says the sensing unit should be cleaned as part of that check (University of Missouri Extension).
A flame that looks wrong, or a furnace that will not light, is a reason to call a licensed contractor. Do not work on gas parts or the burner yourself.
Service before the heating season
Book the service before the first cold week. Ask the technician to check the flame, the vents and the filter, and write down what was found.
Frequently asked
Can a furnace catch on fire?
A gas-fired furnace generally will not cause a fire when it breaks down, if it is correctly installed, properly maintained and properly used (University of Arkansas Extension). That is a general statement about furnaces, not a promise about any one unit.
How often should a furnace be inspected?
The EPA says fuel-burning appliances, including oil and gas furnaces, should be inspected by a trained professional at the beginning of every heating season (EPA). The University of Arkansas Extension says heating equipment and chimneys should be cleaned and inspected yearly (University of Arkansas Extension).
How often should furnace filters be checked?
The University of Missouri Extension says to check furnace filters every two months during the heating season (University of Missouri Extension). ENERGY STAR says to inspect, clean or change filters once a month in a central system (ENERGY STAR).
Does a furnace need a yearly inspection?
The University of Arkansas Extension says to clean and inspect the chimney and furnace yearly (University of Arkansas Extension). The EPA says fuel-burning appliances, including oil and gas furnaces, should be inspected by a trained professional at the beginning of every heating season (EPA).
What should be kept clear around a furnace?
The University of Missouri Extension says to keep the area around the furnace housing free of dust, lint and litter (University of Missouri Extension).
What does the EPA say about carbon monoxide from a furnace?
The EPA says that if no one has symptoms, the home should be ventilated with fresh air and the oil or gas furnace turned off as a possible source (EPA).
Related
- How to heat a basement: start with the ducts
- Window AC fan speed and sizing for humid days
- Indoor Air Quality at Home: How to Monitor It and How to Improve It
Need a furnace checked in the Tampa Bay area? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: University of Arkansas Extension — Awareness of Residential Fire Safety (https://www.uaex.uada.edu/environment-nature/energy/fire-safety.aspx) · University of Missouri Extension — Heating System Maintenance (https://extension.missouri.edu/publications/gh5981) · EPA — Carbon Monoxide and Indoor Air Quality (IAQ) (https://www.epa.gov/indoor-air-quality-iaq/protect-your-family-and-yourself-carbon-monoxide-poisoning) · ENERGY STAR — How to Maintain Your System (https://www.energystar.gov/saveathome/heating-cooling/maintenance-checklist)