Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

How to heat a basement: start with the ducts

Heating a basement starts with the ducts that carry the air. ENERGY STAR says nearly half of the energy used in a home goes to heating and cooling (ENERGY STAR). It says to focus first on sealing ducts that run through an unheated basement (ENERGY STAR). Confirm any equipment choice with a licensed contractor.

A basement is often reached by the same ducts as the rest of the house. This page explains what ENERGY STAR, the U.S. Energy Information Administration and the U.S. Department of Energy say about heating, ducts, fuel and moisture. Use these facts to prepare your questions before any work starts.

Heating uses a large share of home energy

ENERGY STAR says nearly half of the energy used in a home goes to heating and cooling (ENERGY STAR). Read the numbers below as a starting point for your own questions.

In 2020, 52% of household energy use was for space heating and air conditioning (EIA). That share is for U.S. households on average, not for one house.

Space heating and air conditioning account for a much smaller share of household energy use in apartments than in detached single-family homes (EIA). Check which type of home you have before you compare numbers.

Ducts in the basement come first

ENERGY STAR says to focus first on sealing ducts that run through an unheated basement, attic, crawlspace or garage (ENERGY STAR). Those spaces are the place to begin.

Ducts that move air to and from a furnace, central air conditioner or heat pump are often big energy wasters (ENERGY STAR).

ENERGY STAR says sealing and insulating ducts can improve heating and cooling efficiency (ENERGY STAR).

Use duct sealant (mastic) or metal-backed (foil) tape to seal the seams and connections of ducts (ENERGY STAR).

After sealing the ducts in those spaces, wrap them in insulation to keep them from getting hot in summer or cold in winter (ENERGY STAR).

Fix leaks and ducts before buying new equipment

Before you invest in a new HVAC system, address the big air leaks in the house and the duct system (ENERGY STAR). Ask the contractor to check these first, so the work matches the problem.

Improper installation can reduce heating and cooling system efficiency (ENERGY STAR). Ask who will install the equipment and how they will check the work.

Keep the nameplate and the manual with your paperwork, and ask the contractor to walk you through each option in plain terms.

Write down the rooms in the house that the basement system serves, and note which rooms feel too warm or too cold. Bring that list to each estimate so every contractor answers the same questions.

Humidity and crawlspace moisture

The U.S. Department of Energy page is about unvented crawlspaces (DOE). Check whether your space is a basement, a crawlspace or both before you apply that research. Ask your contractor which applies to your house.

Building America research on unvented crawlspaces showed energy savings for heating and cooling (DOE). The same research reported reduced humidity in those crawlspaces (DOE).

In humid climates, outside air is often more moist than crawlspace air, which can lead to structural, mold and pest problems (DOE).

Read the research as a starting point for a conversation with your contractor, not as a promise about your home.

Fuel choices vary across the country

In 2020, natural gas was used in 58% of homes (EIA). Check which fuel already reaches your home before you choose equipment.

Heating oil is primarily used in the Northeast (EIA). Ask the contractor which fuel your system uses.

Wood is used as a main heating fuel mostly in rural areas (EIA). Ask about the fuel before comparing equipment prices.

Questions to ask before you choose

Start with the nameplate and manual on the equipment that already serves the basement.

Ask the contractor which ducts run through the basement and whether they are sealed and insulated.

Ask how the air leaks in the basement walls and rim joists will be addressed. Ask for the work in writing before the crew starts.

Limits of these facts

The facts on this page come from national and research sources. They describe homes and buildings in general, not one basement.

For gas, combustion or electrical work on a basement heater, leave the work to a licensed contractor. Do not attempt those steps yourself.

If the basement has no heating supply at all, ask the contractor to explain the options that fit your fuel and your ducts. Compare written proposals side by side before you sign anything.

Frequently asked

How much home energy goes to heating and cooling?

ENERGY STAR says nearly half of the energy used in a home goes to heating and cooling (ENERGY STAR). In 2020, 52% of household energy use was for space heating and air conditioning (EIA).

Should I seal the basement ducts first?

ENERGY STAR says to focus first on sealing ducts that run through an unheated basement, attic, crawlspace or garage (ENERGY STAR). It says to use duct sealant (mastic) or metal-backed (foil) tape on the seams and connections (ENERGY STAR).

How much can duct sealing improve efficiency?

ENERGY STAR says sealing and insulating ducts can improve heating and cooling efficiency (ENERGY STAR).

Do I need a new system before fixing leaks?

ENERGY STAR says to address the big air leaks in the house and the duct system before investing in a new HVAC system (ENERGY STAR).

Is a basement the same as a crawlspace?

The Department of Energy page is about unvented crawlspaces (DOE). Building America research on those spaces showed energy savings for heating and cooling (DOE).

Which fuel do most homes use?

In 2020, natural gas was used in 58% of homes (EIA). Check which fuel already reaches your home before you choose equipment.

Related

Need help with heating in a Florida basement? Blume Mechanical Service (license CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Sources: ENERGY STAR — Heat & Cool Efficiently | ENERGY STAR (https://www.energystar.gov/saveathome/heating-cooling) · U.S. Energy Information Administration (EIA) — Use of energy in homes (https://www.eia.gov/energyexplained/use-of-energy/homes.php) · U.S. Department of Energy (DOE) — Unvented, Conditioned Crawlspaces - Building America Top Innovation (https://www.energy.gov/eere/buildings/articles/unvented-conditioned-crawlspaces-building-america-top-innovation)

Search Google for best way to heat a basement