HVAC, explained
Air sealing the attic before adding insulation
EPA recommends air sealing the attic before adding attic insulation (ENERGY STAR). Attic air sealing is generally a challenging DIY project, but the benefits can be substantial (ENERGY STAR). Sealing your home may trap indoor air pollutants such as carbon monoxide, radon and volatile organic compounds (VOCs) and create unsafe conditions (ENERGY STAR).
This page covers the order ENERGY STAR gives for attic work, how to decide whether the attic is a reasonable DIY job, where the leaks usually are, and what to check before you disturb old insulation. Each statement names its source.
Why the order matters
Note that EPA recommends air sealing the attic before adding attic insulation (ENERGY STAR).
EPA recommends that you complete an attic sealing project before doing this project (ENERGY STAR). The air sealing page makes the same point from the other side, saying EPA recommends that you complete the attic insulation project after the air sealing project (ENERGY STAR).
Adding insulation to the attic is generally a moderately difficult do-it-yourself project, but the benefits can be substantial (ENERGY STAR).
Decide whether the attic is a DIY job
If your attic is accessible and not too difficult to move around in, and you enjoy tackling bigger home improvement projects, attic air sealing may be a good DIY project (ENERGY STAR).
However, if you find any of the following conditions in your attic, it is recommended that you hire a professional to correct these problems before proceeding (ENERGY STAR).
Wet or damp insulation, indicating a leaky roof, is one of those conditions (ENERGY STAR). Moldy or rotted attic rafters or floor joists, indicating moisture problems, is another (ENERGY STAR).
Kitchen, bathroom or clothes dryer vents that exhaust moist air directly into the attic space instead of outdoors are also on the list of conditions (ENERGY STAR). Difficult attic access and limited space to work also point toward a professional (ENERGY STAR).
Prepare before you climb in
Gather all your tools and supplies before you begin to minimize trips into and out of the attic (ENERGY STAR). Be sure that the work area is well lit by using a drop light, and keep a flashlight handy (ENERGY STAR).
During hot weather, start working early, as attics heat up as the day goes on (ENERGY STAR). Wear a lightweight disposable coverall, gloves and hat to keep itchy and irritating insulation off your skin (ENERGY STAR).
Plan the trip into the attic before you start, so the work is done in fewer trips up the ladder.
Sketch the attic and find the leak areas
This sketch will serve as a reference point once you get into the attic and will help you locate areas of air leakage (ENERGY STAR). Note dropped soffits over kitchen cabinets or bath vanities, slanted ceilings over stairways, areas where walls (interior and exterior) meet the ceiling, and any other dropped-ceiling areas (ENERGY STAR).
Once in the attic, refer to your sketch to locate the areas where leakage is likely to be greatest: where walls (inner and outer) meet the attic floor, dropped soffits (dropped-ceiling areas), and behind or under attic kneewalls (ENERGY STAR).
If you have a finished attic, seal behind the kneewalls (ENERGY STAR). Finished rooms built into attics often have open cavities in the floor framing under the sidewalls or kneewalls (ENERGY STAR).
Dust, especially in rooms directly below the attic, is one of the problems the page lists as a sign that an attic air sealing project may help (ENERGY STAR).
Keep the sketch with your notes, so you can check each marked area after the sealing work is finished.
Vermiculite insulation
Vermiculite is a lightweight, pea-size, flaky gray mineral (ENERGY STAR).
Do not disturb vermiculite insulation unless you have had it tested by an approved lab to be sure that it does not contain asbestos (ENERGY STAR). Until a test answers that question, leave the insulation where it is.
Air sealing can change indoor air
Sealing your home may trap indoor air pollutants such as carbon monoxide, radon and volatile organic compounds (VOCs) and create unsafe conditions (ENERGY STAR). To address this may require additional mechanical ventilation to maintain safe air quality in your home (ENERGY STAR).
Money help and when to get a quote
You may be eligible for financial assistance to make improvements like air sealing and insulating through your state's Weatherization Assistance Program (WAP) (ENERGY STAR). Eligibility depends on your situation, so ask the program directly and confirm any tax or money questions with the IRS, your utility or a tax professional.
Frequently asked
Should I air seal before I add insulation?
EPA recommends air sealing the attic before adding attic insulation (ENERGY STAR). The air sealing page says EPA recommends that you complete the attic insulation project after the air sealing project (ENERGY STAR).
Is attic air sealing a good DIY project?
If your attic is accessible and not too difficult to move around in, attic air sealing may be a good DIY project (ENERGY STAR). Difficult attic access and limited space to work point toward a professional (ENERGY STAR).
What signs suggest a professional should look at the attic first?
ENERGY STAR recommends hiring a professional to correct conditions such as wet or damp insulation, indicating a leaky roof (ENERGY STAR). Moldy or rotted rafters or floor joists, indicating moisture problems, also call for one (ENERGY STAR).
Where are the attic air leaks most likely?
Refer to your sketch to locate the areas where leakage is likely to be greatest, including where walls meet the attic floor and behind or under attic kneewalls (ENERGY STAR). Dropped soffits are one of those areas (ENERGY STAR).
What should I know about vermiculite?
Do not disturb vermiculite insulation unless you have had it tested by an approved lab to be sure that it does not contain asbestos (ENERGY STAR). Vermiculite is a lightweight, pea-size, flaky gray mineral (ENERGY STAR).
Can sealing an attic affect the air inside?
Sealing your home may trap indoor air pollutants such as carbon monoxide, radon and VOCs and create unsafe conditions (ENERGY STAR). Additional mechanical ventilation may be required (ENERGY STAR).
Related
- Home performance assessment and what it checks
- Summer peak electricity demand and air conditioning
- Attic insulation R-value: how to check your attic
Need an HVAC check for the air conditioner or ductwork that serves your attic? Blume Mechanical Service (license CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: ENERGY STAR (U.S. EPA and DOE) — Attic Air Sealing Project (https://www.energystar.gov/saveathome/seal_insulate/attic-air-sealing-project) · ENERGY STAR (U.S. EPA and DOE) — Attic Insulation Project (https://www.energystar.gov/saveathome/seal_insulate/attic-insulation-project) · U.S. Environmental Protection Agency — Attic Insulation Project, as quoted by ENERGY STAR (https://www.energystar.gov/saveathome/seal_insulate/attic-insulation-project) · Internal Revenue Service — Home energy tax credits (https://www.irs.gov/credits-deductions/home-energy-tax-credits)