HVAC, explained
Why Does My Furnace Keep Running?
In most cases, heating and cooling equipment runs only when heat or cooling is called for (EPA, read November 2026). According to ENERGY STAR, a dirty filter makes the system work harder and wastes energy, and ducts are often a large source of wasted energy (ENERGY STAR). ENERGY STAR also says dirty air conditioner coils can make a system run longer (ENERGY STAR). Poor airflow and improper installation can each lower efficiency (ENERGY STAR).
ENERGY STAR discusses filters, ducts, airflow, installation and equipment age in relation to heating and cooling equipment (ENERGY STAR). ENERGY STAR's maintenance checklist lists its cooling items under a Cooling Specific heading, and its installation page addresses refrigerant charge in air conditioners and heat pumps (ENERGY STAR).
When HVAC systems run
EPA says that, in most cases, the equipment runs only when the house needs heating or cooling (EPA).
Dirty filters make the system work harder
Air moves more slowly through a dirty filter, so the system has to work harder to heat or cool the home, which wastes energy (ENERGY STAR). A clean filter also helps keep dust and dirt out of the system, where buildup can lead to expensive upkeep and/or early system failure (ENERGY STAR).
ENERGY STAR suggests a monthly filter check, with extra attention during heavy-use months such as winter and summer (ENERGY STAR). When a filter looks dirty after one month, ENERGY STAR says to change it (ENERGY STAR). ENERGY STAR sets a floor: "At a minimum, change the filter every 3 months" (ENERGY STAR).
EPA says to follow the manufacturer's recommendations on replacement, and that a number of factors can affect how fast a filter gets dirty (EPA). If filters look heavily soiled at replacement time, EPA suggests changing them more often (EPA).
To remove PM 2.5, the fine particles of greatest health concern, EPA advises a MERV 13 rating or higher, up to whatever rating the fan and filter slot in the system can accept (EPA). EPA says most furnaces and HVAC systems can run a MERV 13 filter without equipment problems, provided the filter is changed often (EPA). EPA notes that filter recommendations are often missing from HVAC labels, which sometimes makes it hard to tell whether a higher-efficiency filter suits the unit, and it advises consulting a professional HVAC technician (EPA).
Ducts that leak or are not sealed
Ducts are often a large source of wasted energy when they carry air for a forced air furnace, a central air conditioner or a heat pump (ENERGY STAR). Leaky ducts waste energy and can also reduce airflow, which lowers comfort (ENERGY STAR). ENERGY STAR says sealing and insulating ducts can make a heating and cooling system more efficient (ENERGY STAR, read November 2026).
ENERGY STAR says to start with the ducts in the attic, a crawlspace, an unheated basement, or a garage (ENERGY STAR). Close the seams and connections with mastic, which is duct sealant, or with metal-backed foil tape (ENERGY STAR). After the seal is in place, wrap the ducts in insulation so they are protected from summer heat and winter cold (ENERGY STAR). Afterward, seal any other reachable ducts inside the conditioned living space (ENERGY STAR).
ENERGY STAR advises asking a contractor to inspect the duct system, run a leakage test and make needed repairs (ENERGY STAR). A good contractor will look over the ducts, where that applies, for leaks and insulation, and will measure airflow so that it matches the manufacturer's specifications (ENERGY STAR).
Airflow, sizing and installation
Poor airflow can lower efficiency, raise utility bills, make the air overly damp, reduce comfort and shorten equipment life (ENERGY STAR). Oversized equipment may switch on and off too often, which means less comfort and a shorter service life (ENERGY STAR). A bigger unit is not automatically better, and sizing should reflect the house itself, including its size, insulation and windows (ENERGY STAR).
ENERGY STAR describes quality installation as equipment that is properly designed and sized for the home, airflow that is optimized, the right refrigerant charge, and ducts that are evaluated (ENERGY STAR). Improper installation can lower efficiency, raise utility bills and possibly shorten equipment life (ENERGY STAR, read November 2026).
Cooling coils and refrigerant charge
ENERGY STAR's checklist calls for cleaning air conditioning coils and checking the refrigerant level, and its installation page covers charging an air conditioner or heat pump (ENERGY STAR). Dirty evaporator and condenser coils can reduce how well the system cools a home and can make it run longer, which raises energy costs and shortens equipment life (ENERGY STAR). Refrigerant level in a central air conditioner matters as well: too much or too little makes the system less efficient, and the checklist links that to higher energy costs and shorter equipment life (ENERGY STAR).
Charging an air conditioner or heat pump correctly can cut energy use and lower the chance of system failure (ENERGY STAR). ENERGY STAR's check-up list also includes cleaning and adjusting blower components so air moves properly through the system, supporting greater comfort (ENERGY STAR).
When to have equipment evaluated
Equipment older than 10 years, or equipment that is not keeping the house comfortable, should be checked by a professional HVAC contractor (ENERGY STAR). During that visit, the contractor should spend a significant amount of time inspecting the current system and the home (ENERGY STAR).
Sometimes the real source of a problem is air leakage or the duct system rather than the equipment (ENERGY STAR). ENERGY STAR recommends dealing with major air leaks and the duct system before investing in new HVAC equipment (ENERGY STAR). If the existing equipment is not performing efficiently or needs upgrading, a replacement unit with the ENERGY STAR label is worth considering (ENERGY STAR).
Questions to ask a contractor
Ask whether the new system's airflow matches the manufacturer's performance specifications (ENERGY STAR). Find out whether the contractor tests and adjusts the refrigerant charge, which affects comfort and efficiency (ENERGY STAR). A contractor should be able to show calculations of savings for ENERGY STAR equipment (ENERGY STAR).
ENERGY STAR's typical maintenance check-up includes checking the thermostat settings, so heating and cooling stay comfortable when you are home and save energy while you are away (ENERGY STAR). ENERGY STAR says a smart thermostat with the ENERGY STAR label offers control and convenience, along with energy savings and insight, compared with manual or programmable thermostats (ENERGY STAR). Check for rebates on energy-efficient equipment that carries the ENERGY STAR mark (ENERGY STAR).
Ask friends, neighbors and co-workers for referrals, and check references about installation or service performance, including whether a job finished on time and on budget (ENERGY STAR). Find out what license and insurance requirements apply in your state (ENERGY STAR). Before calling, note the model of the current system, its maintenance history and any rooms that stay uncomfortable (ENERGY STAR).
Get written, itemized estimates (ENERGY STAR). When comparing bids, compare cost, energy efficiency and warranties (ENERGY STAR). The lowest price may not be the better value if it is less efficient, since energy costs would then be higher (ENERGY STAR). Sign a written proposal before work starts; it protects you by specifying project costs, model numbers, the job schedule and warranty information (ENERGY STAR).
Frequently asked
How often do HVAC systems usually run?
According to EPA, most HVAC systems run just when heat or cooling is called for (EPA, read November 2026).
What does a dirty filter do to a furnace?
A dirty filter holds back airflow, so the system works harder and energy is wasted (ENERGY STAR).
How much can sealing ducts help?
ENERGY STAR links sealing and insulating ducts to better heating and cooling efficiency, and suggests mastic or metal-backed foil tape for the seams (ENERGY STAR).
Do I need to call a pro for this?
Maybe. You can do the monthly filter check and review your thermostat settings (ENERGY STAR). Refrigerant, electrical, gas and combustion work calls for a licensed contractor, and ENERGY STAR says to ask whether the contractor tests and adjusts the refrigerant charge, which affects comfort and efficiency (ENERGY STAR).
When should older equipment be evaluated?
ENERGY STAR's threshold is equipment more than 10 years old, and a system that does not keep the house comfortable also warrants a professional evaluation (ENERGY STAR).
Can installation affect how a system runs?
Yes. ENERGY STAR says improper installation can cut efficiency, raise utility costs and possibly shorten equipment life (ENERGY STAR).
Related
- Furnace Short Cycling: Why a Furnace Keeps Turning Off
- Which Way Does a Furnace Filter Go?
- Heating Tune-Up: What It Covers and What to Leave to a Pro
- How Often Should HVAC Be Serviced?
Need a furnace checked in Pinellas, Hillsborough or Pasco County? Blume Mechanical Service (license CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment, is brand-agnostic, and can be reached at 727-330-9131.
Sources: ENERGY STAR — Heat & Cool Efficiently (https://www.energystar.gov/saveathome/heating-cooling) · ENERGY STAR — How to Maintain Your System (https://www.energystar.gov/saveathome/heating-cooling/maintenance-checklist) · ENERGY STAR — Learn about HVAC Quality Installation (https://www.energystar.gov/saveathome/heating-cooling/hvac-quality-installation) · ENERGY STAR — Tips for Hiring a Heating and Cooling Contractor (https://www.energystar.gov/saveathome/heating-cooling/10-tips-hiring) · EPA — Guide to Air Cleaners in the Home (https://www.epa.gov/indoor-air-quality-iaq/guide-air-cleaners-home)