Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Tankless water heaters: how they work and how to size one

Whole-home gas tankless units heat water only when needed, which eliminates energy lost during standby operation (ENERGY STAR). By heating water only when needed, tankless water heaters can achieve greater efficiency than standard tank-type water heaters (ENERGY STAR). Tankless models are rated by how many gallons of hot water they produce per minute, called GPM (ENERGY STAR).

Tankless water heaters work differently from tank models, and the differences affect size, installation and cost. This page explains the operating steps, the sizing measure and the installer questions that ENERGY STAR publishes for whole-home gas tankless units. Each fact names its source, and where ENERGY STAR gives no figure, this page gives none either. Read the sections in order, because the installer questions depend on the sizing and the energy steps.

How a tankless water heater heats water

Whole-home gas tankless units heat water only when needed, which eliminates energy lost during standby operation (ENERGY STAR). When a hot water tap is turned on, cold water is drawn into the water heater (ENERGY STAR). A flow sensor activates the gas burner, which warms the heat exchanger (ENERGY STAR).

Incoming cold water goes around the heat exchanger and leaves the heater at its set-point temperature (ENERGY STAR). Combustion gases exit through a dedicated, sealed vent system (ENERGY STAR).

The steps above happen each time a tap opens. The next section explains why this design can use less energy than a tank.

Why tankless units can be more efficient

By heating water only when needed, tankless water heaters can achieve greater efficiency than standard tank-type water heaters (ENERGY STAR). ENERGY STAR certified gas tankless water heaters cut water heating expenses and provide continuous hot water delivery (ENERGY STAR).

The reason is the same in both cases: the unit does not keep a full tank hot all day. The sections that follow explain how to size the unit and what to ask for.

Sizing by gallons per minute

Tankless models are rated by how many gallons of hot water they produce per minute, called GPM (ENERGY STAR). The capacity of gas storage water heaters is based on the number of gallons that will fit in the tank (ENERGY STAR).

The more likely you are to have the shower, dishwasher and clothes washer going at once, the larger the GPM you will need (ENERGY STAR).

Write down which fixtures run together in your home. Bring that list to the installer, so the size discussion starts from actual use.

What the installer checks

The installer should confirm the optimal GPM size, whether the natural gas line is sufficient, and how the combustion gases will be vented (ENERGY STAR). ENERGY STAR advises scheduling an in-home estimate with an installer (ENERGY STAR).

A manufacturer or retailer website can give a general idea of cost, but an installer must come to your home for a customized price (ENERGY STAR).

Your installer may need time to order the proper model, and installation may take longer than for a standard water heater (ENERGY STAR).

Choosing an installer

ENERGY STAR says to check the company with the local Better Business Bureau (ENERGY STAR). Ask whether the company will obtain a local permit if necessary, and whether it understands local residential building codes (ENERGY STAR).

Get each estimate in writing, so you can compare the same model, size and installation terms across companies.

Rebates and eligibility rules

You may be able to reduce your costs by taking advantage of rebates (ENERGY STAR). The Special Deals Finder shows whether rebates are available for ENERGY STAR certified water heaters in your zip code (ENERGY STAR).

Review the eligibility rules before you make your purchase (ENERGY STAR).

Check the current program details before you sign a purchase agreement.

Availability and standards

Products must meet minimum requirements for energy efficiency, hot water delivery, warranty period, and safety (ENERGY STAR). ENERGY STAR qualified gas tankless water heaters are currently available from contractors and retailers (ENERGY STAR).

Use the ENERGY STAR product list when you compare models.

Keep the model name and certification details with each written estimate.

Gas tankless models for new homes and remodels

Gas tankless models are a great choice for new construction and major remodeling (ENERGY STAR). Gas tankless models are also becoming popular as a replacement for gas storage water heaters (ENERGY STAR).

If you are building or remodeling, plan the installation early, because the unit may take longer to order and install than a standard water heater.

Compare the product details, the installation estimate and the rebate rules together before you choose a unit, so each decision uses the same information.

Frequently asked

Do tankless water heaters waste less energy?

Whole-home gas tankless units heat water only when needed, which eliminates energy lost during standby operation (ENERGY STAR). By heating water only when needed, tankless water heaters can achieve greater efficiency than standard tank-type water heaters (ENERGY STAR).

How do I know what size I need?

Tankless models are rated by how many gallons of hot water they produce per minute, called GPM (ENERGY STAR). The more likely you are to have the shower, dishwasher and clothes washer going at once, the larger the GPM you will need (ENERGY STAR).

Is a tankless unit a good choice for a remodel?

Gas tankless models are a great choice for new construction and major remodeling (ENERGY STAR). Gas tankless models are also becoming popular as a replacement for gas storage water heaters (ENERGY STAR).

Who should I ask for an estimate?

ENERGY STAR advises scheduling an in-home estimate with an installer (ENERGY STAR). A manufacturer or retailer website can give a general idea of cost, but an installer must come to your home for a customized price (ENERGY STAR).

Do rebates apply to every unit?

You may be able to reduce your costs by taking advantage of rebates (ENERGY STAR). Review the eligibility rules before you make your purchase (ENERGY STAR).

What does the installer check?

The installer should confirm the optimal GPM size, whether the natural gas line is sufficient, and how the combustion gases will be vented (ENERGY STAR). Your installer may need time to order the proper model, and installation may take longer than for a standard water heater (ENERGY STAR).

Related

Need an HVAC check for the air conditioner or heat pump in your home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Sources: ENERGY STAR (U.S. EPA and DOE) — How It Works — Whole-Home Gas Tankless Water Heaters (https://www.energystar.gov/products/whole_home_tankless_gas_water_heaters/how-it-works) · ENERGY STAR (U.S. EPA and DOE) — Whole Home Tankless Gas Water Heaters (https://www.energystar.gov/products/whole_home_tankless_gas_water_heaters)

Search Google for tankless water heaters