Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Standby power and phantom loads in your home

A phantom load, also called standby power, refers to power consumed by electronics and appliances while they are switched off (DOE). The DOE quiz says the forty products in a typical home together make up a national share of residential electricity use (DOE). ENERGY STAR sets standby limits for certified televisions, so the product label or the manual is the place to check a specific device (ENERGY STAR).

This page explains what the U.S. Department of Energy (DOE) calls a phantom load and what federal energy statistics report about electronics in homes. It also covers what ENERGY STAR criteria say about televisions, smart plugs and power strips. The figures on this page are national averages, and each sentence names its source. Read the national figures as context for your own home, and check the device for its own numbers.

What a phantom load is

A phantom load, also called standby power, refers to power consumed by electronics and appliances while they are switched off (DOE).

The DOE quiz uses both names for the same idea, so both appear on this page (DOE).

The sections below separate national estimates from device standards, because they answer different questions.

Keep that difference in mind when you compare a home's bill with a product's label.

How home energy use breaks down

The DOE quiz says a typical American home has forty products constantly drawing power (DOE).

The same DOE quiz says those forty products together make up a national share of residential electricity use (DOE).

That is a national share, so it is a rough guide for any single home rather than a measurement of yours.

In 2020, space heating and air conditioning made up more than half of household energy use, at 52% (EIA).

In 2020, 23% of home energy use went to devices such as televisions, cooking appliances, clothes washers and dryers, and consumer electronics (EIA).

In 2020, retail electricity purchases accounted for about 44% of residential end-use energy consumption (EIA).

National shares help set expectations, but they do not replace a look at your own equipment.

What ENERGY STAR says about smart plugs and power strips

ENERGY STAR's smart home energy management criteria include smart plugs and smart power strips (ENERGY STAR).

ENERGY STAR says smart plugs and power strips may not carry its mark individually unless a device-specific ENERGY STAR program certifies them (ENERGY STAR).

Check for a device-specific certification before you rely on any ENERGY STAR label on a strip or plug.

Ask the seller or manufacturer for the certification record for the exact model you plan to buy.

Television standby limits

ENERGY STAR's television criteria set passive standby power at 0.5 watts or less when measured under the federal test procedure (ENERGY STAR).

For televisions that can connect to a network, ENERGY STAR's criteria cap active standby power at 1.0 watt (ENERGY STAR).

EIA reports that LED and LCD televisions use less energy in both standby and active modes than plasma, projection and tube televisions of the same size (EIA).

In 2020, 89% of the two most-used TVs in U.S. homes were LED or LCD (EIA).

These limits describe certified models under the stated test, so the model's own data sheet is the place to confirm a particular set.

Streaming devices and set-top boxes

In 2020, 56% of U.S. homes used at least one internet streaming device with a TV, up from 29% in 2015 (EIA).

EIA says internet streaming devices, on average, use less energy than set-top boxes (EIA).

In 2020, 72% of households with a TV used their most-used TV four or more hours per weekday (EIA).

Compare the model numbers on your own equipment, since national averages do not describe one home.

How much electricity an average home uses

The average U.S. household uses about 10,500 kilowatt-hours of electricity per year (EIA).

EIA says a typical U.S. household today is more likely to use more electronics than one did 30 years ago (EIA).

The national averages on this page give context, but they cannot tell you how much standby power one house uses.

For that, the nameplate, the manual and your own electric bill are the places to start.

Cutting standby use at home

Start by listing the devices that stay plugged in all the time, such as televisions and streaming boxes.

Read the manual or nameplate for each one, since national averages do not give the wattage of a single product.

Compare the standby figures you find against the ENERGY STAR limits described above, and note which devices exceed them.

If an air conditioner or heat pump needs a check, Blume Mechanical Service repairs, installs and maintains HVAC and refrigeration equipment, so that is the HVAC side of this topic.

Frequently asked

What is a phantom load?

A phantom load, also called standby power, refers to power consumed by electronics and appliances while they are switched off (DOE).

How much of residential electricity does standby power use?

The DOE quiz says the forty products in a typical home together make up a national share of residential electricity use (DOE). That is a national share, so treat it as a rough guide.

Can a smart power strip carry the ENERGY STAR mark?

ENERGY STAR says smart plugs and power strips may not carry its mark individually unless a device-specific ENERGY STAR program certifies them (ENERGY STAR). Check the certification for the exact model.

Do LED televisions use less standby energy?

EIA reports that LED and LCD televisions use less energy in both standby and active modes than plasma, projection and tube televisions of the same size (EIA).

What is the standby limit for an ENERGY STAR television?

ENERGY STAR's television criteria set passive standby power at 0.5 watts or less when measured under the federal test procedure (ENERGY STAR). Check the model's own data for a specific set.

Are these figures specific to Florida?

No. The figures on this page are national, and the household electricity average is for U.S. households (EIA). Use your own equipment and bills for a Florida home.

Related

Need an HVAC check on the air conditioner in your Florida home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Sources: U.S. Department of Energy — QUIZ: Test your Home Energy IQ (https://www.energy.gov/quiz-test-your-home-energy-iq) · U.S. Energy Information Administration — Use of energy in homes - U.S. Energy Information Administration (EIA) (https://www.eia.gov/energyexplained/use-of-energy/homes.php) · U.S. Energy Information Administration — Electricity use in homes - U.S. Energy Information Administration (EIA) (https://www.eia.gov/energyexplained/use-of-energy/electricity-use-in-homes.php) · U.S. Energy Information Administration — More than half of U.S. homes used a streaming device with their TVs in 2020 - U.S. Energy Information Administration (EIA) (https://www.eia.gov/todayinenergy/detail.php?id=52278) · ENERGY STAR (U.S. EPA and DOE) — Smart Home Energy Management Systems Key Product Criteria | ENERGY STAR (https://www.energystar.gov/products/shems_key_product_criteria) · ENERGY STAR (U.S. EPA and DOE) — Televisions Key Product Criteria | ENERGY STAR (https://www.energystar.gov/products/televisions/key_product_criteria)

Search Google for standby power phantom loads