Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Solar thermal collectors explained: how they heat

Solar thermal energy uses the sun's heat for heating water, air and buildings, and for generating electricity (EIA). Flat-plate collectors are the most common non-concentrating type, used when temperatures lower than 200°F are sufficient (EIA). Concentrating collectors focus solar energy onto an absorber, and solar thermal power plants use them (EIA).

This page explains the main kinds of solar thermal system, the parts of a flat-plate collector and how a solar water heater loop works. It also covers pool and air heating, concentrating collectors, roof placement and what federal data show about residential solar use. Each fact names its source.

What solar thermal energy is used for

We use the sun's energy (solar thermal energy) for many things, including heating water, air, and the inside of buildings and generating electricity (EIA). Active heating systems use fans or pumps to move air or liquid through collectors (EIA).

The air or liquid is heated at the collector and then flows into a building or heat-storage system, where the heat can be used later (EIA).

Passive heating: windows, walls and shading

Buildings designed for optimal passive solar heating usually have large windows facing south in the Northern Hemisphere (EIA). The sun shines through the windows onto special walls or floors that absorb solar heat (EIA).

These building materials then release the stored heat, warming the interior naturally (EIA). Window overhangs or shades block the sun from entering the windows during the summer to keep the building cool (EIA).

Flat-plate collectors and their three parts

Flat-plate collectors are the most common type of non-concentrating collectors (EIA). They are used when temperatures lower than 200°F are sufficient, for example for the solar panels on the roof of a home or building (EIA).

EIA describes a flat metal plate that collects and absorbs solar energy (EIA). A transparent cover lets solar energy pass through and reduces heat loss from the absorber (EIA). A layer of insulation on the back of the absorber reduces heat loss (EIA).

How a solar water heater loop works

Solar water heaters use a metal pipe attached to the collector (EIA). The pipe runs in a loop from the collector, through a water storage tank, and back to the collector (EIA). A heat-transfer fluid flows through the metal pipe (EIA).

The fluid inside the pipe absorbs heat at the collector, flows down through the tube, and then heats the water inside the storage tank (EIA).

An ENERGY STAR certified solar water heating system can cut your annual hot water costs in half (ENERGY STAR). It is generally designed for use with an electric or gas back-up water heater (ENERGY STAR).

Pool and air heating

Solar systems for heating swimming pool water usually have flat-plate collectors that do not have covers or insulation for the collector (EIA). The pool water circulates from the pool through the collector and back to the pool (EIA).

Solar air-heating systems use fans to move air through flat-plate collectors and into buildings (EIA).

Concentrating collectors

EIA describes a highly reflective collector that focuses, or concentrates, solar energy onto an absorber (EIA). The collector usually moves during the day with the sun to keep the sunlight focused on the absorber (EIA).

Solar thermal power plants use concentrating solar collector systems because they can produce the high-temperature heat needed to generate electricity (EIA).

Roof placement, sunlight and ground options

Most solar water heating systems are installed on the roof (ENERGY STAR). ENERGY STAR's list of roof conditions includes direct sunlight between the hours of 10 AM and 4 PM year round (ENERGY STAR).

If your roof isn't appropriate, but you have suitable unshaded land next to your home, you may want to consider a ground-mounted system instead (ENERGY STAR).

Maintenance and residential use

For a solar thermal system, don't forget about maintenance (ENERGY STAR). EIA's table lists the residential uses of solar energy as space and water heating and electricity generation (EIA).

In 2020, geothermal, solar and wood fuels together accounted for about 5% of residential sector energy end use (EIA).

Frequently asked

What is solar thermal energy used for?

EIA says the sun's energy, called solar thermal energy, is used for heating water, air and buildings, and for generating electricity (EIA). Those are the uses listed on the EIA page, which describes the sun's energy used for many things, including heating the inside of buildings (EIA).

What is the difference between passive and active solar heating?

Active solar heating systems use fans or pumps to move air or liquid through collectors (EIA). Passive solar heating uses windows and building materials that absorb and release heat (EIA). The sun shines through the windows onto special walls or floors that absorb solar heat (EIA). Buildings designed for optimal passive solar heating usually have large windows facing south in the Northern Hemisphere (EIA).

What is a flat-plate collector?

Flat-plate collectors are the most common type of non-concentrating collectors (EIA). EIA describes a flat metal plate, a transparent cover and a layer of insulation on the back as its main parts (EIA). Flat-plate collectors can be the solar panels on the roof of a home or building (EIA).

Does a solar water heater use a tank?

A heat-transfer fluid flows through the metal pipe (EIA). The fluid inside the pipe absorbs heat at the collector, flows down through the tube, and then heats the water inside the storage tank (EIA). ENERGY STAR says a certified system is generally designed for use with an electric or gas back-up water heater (ENERGY STAR).

Do solar water heaters have to go on the roof?

Most solar water heating systems are installed on the roof (ENERGY STAR). If your roof is not appropriate, but you have suitable unshaded land next to your home, ENERGY STAR says you may want to consider a ground-mounted system instead (ENERGY STAR). ENERGY STAR's list of roof conditions includes direct sunlight between the hours of 10 AM and 4 PM year round (ENERGY STAR).

What do concentrating collectors do?

EIA describes a highly reflective collector that focuses, or concentrates, solar energy onto an absorber (EIA). Solar thermal power plants use these collectors to produce the high-temperature heat needed to generate electricity (EIA).

Related

Need an HVAC check on the air conditioner or heating system in your Florida home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Sources: U.S. Energy Information Administration (EIA) — Solar thermal collectors - U.S. Energy Information Administration (EIA) (https://www.eia.gov/energyexplained/solar/solar-thermal-collectors.php) · U.S. Energy Information Administration (EIA) — Use of energy in homes - U.S. Energy Information Administration (EIA) (https://www.eia.gov/energyexplained/use-of-energy/homes.php) · ENERGY STAR (U.S. EPA and DOE) — Solar Water Heaters | ENERGY STAR (https://www.energystar.gov/products/solar_water_heaters)

Search Google for solar thermal collectors explained