HVAC, explained
Indoor air quality during a home remodel
Check the basement for leaks or other signs of moisture problems before converting it into living space (EPA). Fixing a radon problem will usually be easier and less expensive before the basement is finished (EPA). Keep occupants, especially children, away from the work area (EPA).
EPA's remodeling guidance covers moisture, radon, bathroom and kitchen ventilation, dust, off-gassing, lead paint and combustion safety. This page follows that guidance room by room, so you can see which steps come before the work starts and which come after.
Check moisture and radon first
Check the basement for leaks or other signs of moisture problems before converting it into living space (EPA). Because damp basements promote biological growth, including molds, they are not healthy places to live in (EPA).
Correcting moisture problems may be as simple as redirecting downspout runoff away from the foundation (EPA). Fixing a radon problem will usually be easier and less expensive before the basement is finished, so test before the remodeling project begins (EPA).
Carpet and cold concrete in basements
Do not install carpet near water sources or in areas with a chronic moisture problem, such as around sinks, tubs, showers and toilets (EPA). Concrete slabs, especially those without insulation underneath, are often colder than the air in the basement (EPA). More efficient windows may be less prone to condensation and related mold growth (EPA).
Combustion equipment after a basement job
Because you are changing the basement and affecting how air moves in the home, a professional should check how any combustion equipment operates after the work is finished (EPA). The check is to make sure that the equipment is not backdrafting (EPA).
Sufficient depressurization can actually pull air and combustion products back down a chimney or any flue, such as that of a gas water heater, and into the house (EPA). Because of the harmful substances, such as carbon monoxide, in combustion gases, this depressurization can create a very dangerous situation (EPA).
Old windows and lead paint
Painted window sashes and frames in homes built before 1978 may contain lead-based paint (EPA). This is a special concern because the friction of opening and closing windows can release lead dust into the home (EPA).
Unless a lead-based paint inspection shows otherwise, treat paint in homes built before 1978 as containing lead (EPA).
While costs do not always justify the change from purely an energy savings perspective, there may be other benefits of new windows (EPA).
Bathroom ventilation during a remodel
Ventilation is especially important in bathrooms to remove unwanted moisture (EPA). This helps prevent the growth of mold and mildew, which can cause allergic reactions and aggravate lung diseases such as asthma (EPA).
If you do not have a bathroom exhaust fan, or if your current fan is not working, you should install one (EPA). The air should be exhausted directly to the outside, and not just into an attic or some other space in the house (EPA).
For bathrooms, the recommended exhaust is 25 cubic feet per minute with a continuously operating fan, or 50 cubic feet per minute with a fan turned on and off as needed (EPA). Despite good ventilation, moisture-laden air from the bathroom can still make its way into wall and ceiling cavities (EPA).
Kitchen range hoods
Cooking in the kitchen generates a lot of moisture and odors, and requires ventilation (EPA). The range hood should be used to capture and exhaust combustion products and vent them directly outdoors (EPA).
For a typical range, the recommended airflow is 100 cubic feet per minute (EPA). Larger fans may need make-up air provided, to prevent excessively depressurizing the home and potentially causing combustion equipment to backdraft (EPA).
A kitchen remodeling project may present an opportunity to improve air-sealing (EPA).
Dust, mold and off-gassing during the work
The key to mold control is moisture control (EPA). It is important to dry damaged areas and items within 24-48 hours to prevent mold growth (EPA).
Use low-dust work practices, such as misting surfaces with water before sanding or scraping (EPA). Exhaust ventilation from the work area will help remove dust and other pollutants (EPA).
The typical recommendation is to provide maximum ventilation both during installation and for at least 72 hours after installation is completed (EPA). When possible, allow materials containing VOCs to off-gas outside before bringing them into the home (EPA).
Barriers, isolation and keeping occupants out
Keep occupants, especially children, away from the work area (EPA).
A simple barrier consists of 6 mil poly sheeting taped over doors and other openings in the room (EPA). Isolation means that the work area is sealed with no direct access to occupied areas of the home (EPA).
If a project requires disturbing areas that contain asbestos, use an asbestos professional or contact your health department for advice before proceeding (EPA).
Frequently asked
Should I test for radon before a basement remodel?
Fixing a radon problem will usually be easier and less expensive before the basement is finished (EPA). For that reason, test before the remodeling project begins (EPA).
Can a remodel affect my gas water heater?
Sufficient depressurization can actually pull air and combustion products back down a chimney or any flue, such as that of a gas water heater, and into the house (EPA). Have a professional check combustion equipment after the basement work is finished (EPA).
How long should a room be ventilated after new flooring?
The typical recommendation is to provide maximum ventilation both during installation and for at least 72 hours after installation is completed (EPA).
Is lead paint a concern in an older home?
Unless a lead-based paint inspection shows otherwise, treat paint in homes built before 1978 as containing lead (EPA). Painted window sashes and frames in those homes may contain lead-based paint (EPA).
What is a simple dust barrier?
A simple barrier consists of 6 mil poly sheeting taped over doors and other openings in the room (EPA). Isolation means that the work area is sealed with no direct access to occupied areas of the home (EPA).
Why does a range hood matter during a kitchen remodel?
The range hood should be used to capture and exhaust combustion products and vent them directly outdoors (EPA). Larger fans may need make-up air provided (EPA).
Related
- Refrigerator energy use and efficiency
- Chest vs upright freezer energy use
- Bathroom exhaust fans and humidity control
Planning a remodel that changes your HVAC equipment or ductwork in Tampa Bay? Blume Mechanical Service (license CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: U.S. Environmental Protection Agency — Remodeling Your Home and Indoor Air Quality (https://www.epa.gov/indoor-air-quality-iaq/remodeling-your-home-and-indoor-air-quality) · U.S. Environmental Protection Agency — Best Practices for Indoor Air Quality when Remodeling Your Home (https://www.epa.gov/indoor-air-quality-iaq/best-practices-indoor-air-quality-when-remodeling-your-home)