Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

How to unlock a Honeywell thermostat keypad

The T6 Pro manual and the FocusPRO P200 Series manual both give the four-digit password 1234 (Honeywell T6 Pro manual; Honeywell FocusPRO manual), and on the T6 Pro the unlock starts with the "CENTER" button (Honeywell T6 Pro manual). Set each digit with + or -, press Select after each one, and press Select a final time once all four digits are in (Honeywell T6 Pro manual). If the code is wrong, the screen flashes dash lines, so step back with the Back button, enter the correct number and press Select (Honeywell T6 Pro manual).

Some Honeywell thermostats can lock their keypad, and on the models Honeywell names in its support articles and manuals, a four-digit password unlocks it (Honeywell T6 Pro manual; Honeywell FocusPRO manual). Check the model label and the manual for your unit before you start.

Screen lock settings on these models

Honeywell's support article for the TH4210U2002 and TH4110U2005 lists three screen lock settings: Unlocked, "Partial Lock" and Full Lock (Honeywell support article). With Unlocked, every setting can be adjusted. Partial Lock allows setpoint changes while the other settings stay locked, and Full Lock allows no changes at all (Honeywell support article). When the screen lock is active, a lock icon appears on the display (Honeywell support article).

To change the setting, start at the Menu, use + or - to reach LOCK and press Select, then use + or - to reach OFF, PART or ON and press Select again (Honeywell support article).

The T6 Pro manual describes the same kind of choice in its own terms: OFF means unlocked with full access, PART means partial lockout where only the temperature can be changed, and ON means no access at all (Honeywell T6 Pro manual).

Entering the password

On the T6 Pro, the keypad unlock begins by pressing the CENTER button, after which the four-digit code is entered (Honeywell T6 Pro manual). Enter the code one digit at a time. Use + or - to change the first digit, then press Select, and repeat the same steps for the second, third and fourth digits (Honeywell T6 Pro manual).

When all four digits have been entered, press Select once more, and the keypad unlocks (Honeywell T6 Pro manual).

What the unlock indicator shows

On the FocusPRO P200 Series, models TH2110U4004 and TH2320U4006, the display shows "UNLOCK" next to the left center button whenever the keypad is locked, partially or fully (Honeywell FocusPRO manual).

To change the lock on that model, press Menu, move to LOCK and press SELECT, then move to OFF, PART or ON and press SELECT. Press the SAVE & EXIT button to finish (Honeywell FocusPRO manual).

To unlock it, keep pressing the left center button until the upper part of the display reads 0 with three dashes (Honeywell FocusPRO manual). Enter the same four-digit code with the change buttons, pressing SELECT after each digit and once more after the fourth (Honeywell FocusPRO manual).

When the code does not work

If the code is entered incorrectly on the T6 Pro, the screen flashes dash lines (Honeywell T6 Pro manual). Press the "Back" button to return one step, enter the correct number, and press Select (Honeywell T6 Pro manual). On the FocusPRO, use BACK the same way and then press SELECT (Honeywell FocusPRO manual).

If the code still fails, contact the installer or Honeywell support.

Why the lock option may be missing

The Keypad Lockout setting may be missing from the user menu on some models (Honeywell T6 Pro manual). That can happen when the installer has not set the thermostat to allow the option (Honeywell T6 Pro manual).

The FocusPRO P200 Series shows Keypad Lockout in the user menu only when the installer has specifically set the thermostat to allow it (Honeywell FocusPRO manual).

If the option is missing from your menu, ask the installer whether lockout was turned on during setup.

Installer settings and newer models

On Series 0 to 6 thermostats, the installer menu (ISU) offers the same lockout choices as the user menu, with 0 for none, 1 for partial and 2 for full (Honeywell T6 Pro manual).

For Series 7 or later, the installer setting lets the contractor switch the Lockout feature on or off (Honeywell T6 Pro manual). With the value 0, the feature is disabled and no lockout option appears under Menu. With the value 1, the feature is enabled and the lockout setting can be turned on or off from the main menu (Honeywell T6 Pro manual).

Check the model and series of your thermostat before you contact support.

When to call a professional

If someone else set the lock, ask Honeywell support or the installer for help.

Changes to installer settings should be made by a licensed contractor.

Frequently asked

Which password unlocks a Honeywell Pro keypad?

Honeywell's T6 Pro manual gives a four-digit password, 1234, entered after the CENTER button is pressed (Honeywell T6 Pro manual). The FocusPRO P200 manual uses the same code (Honeywell FocusPRO manual). Check the manual for your own model before you rely on these steps.

What happens if I enter the password wrong?

On the T6 Pro, the screen flashes dash lines (Honeywell T6 Pro manual). The manual says to step back with the Back button, re-enter the correct number and press Select again (Honeywell T6 Pro manual).

What does UNLOCK mean on a FocusPRO thermostat?

It means the keypad is locked, either partially or fully. The display places UNLOCK next to the left center button (Honeywell FocusPRO manual). Press that button until the display shows 0 with three dashes, then enter the code (Honeywell FocusPRO manual).

Why is there no keypad lockout option in my menu?

According to the T6 Pro manual, the option may be absent if the installer has not set the thermostat to permit it (Honeywell T6 Pro manual). On the FocusPRO P200 it appears in the user menu only when the installer has specifically set the thermostat to allow it (Honeywell FocusPRO manual).

What is PART on a Honeywell thermostat lock?

PART is the partial lockout setting. On the T6 Pro manual it lets only the temperature be changed (Honeywell T6 Pro manual). On the TH4210U2002 and TH4110U2005 the matching choice is called Partial Lock, which allows setpoint changes and locks the other settings (Honeywell support article).

Who can change the lock setting on a Series 7 thermostat?

The T6 Pro manual says that for Series 7 or later, the setting lets the contractor switch the Lockout feature on or off (Honeywell T6 Pro manual). If the option is missing from your menu, ask your installer to check it.

How many screen lock settings do these thermostats have?

Honeywell lists three for the TH4210U2002 and TH4110U2005: Unlocked, Partial Lock and Full Lock (Honeywell support article). The choice is made from the LOCK item in the Menu (Honeywell support article).

Can a homeowner turn off the lockout feature on a Series 7 unit?

The T6 Pro manual places the lockout feature choice in the installer menu, entered by pressing and holding the MENU and buttons (Honeywell T6 Pro manual). On Series 7 or later, the contractor holds that switch (Honeywell T6 Pro manual), so a homeowner may need the installer to change it. With the feature disabled, no lockout option is shown under Menu. Ask the installer about it.

Related

Need help with a thermostat that will not respond or needs an installer setting changed? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.

Last updated: 2026-11-21

Sources: Honeywell Home — How do I lock/unlock the screen TH4210U2002, TH4110U2005 thermostat? (https://www.honeywellhome.com/blogs/support/how-do-i-lock-unlock-the-screen-th4210u2002-th4110u2005-thermostat) · Honeywell — 6. Keypad Lockout (https://docs.honeywellhome.com/t6-pro-ii/en-us/Content/Installation-Instructions/6.%20Keypad%20Lockout.htm) · Honeywell — Keypad Lockout (https://docs.honeywellhome.com/focuspro-p200-um/en-us/Content/User-Manual/Keypad%20Lockout.htm)

Search Google for how to unlock honeywell thermostat