HVAC, explained
Heat island effect on energy bills and cooling
Heat islands increase electricity demand for air conditioning and peak energy demand (EPA). EPA says this increased demand contributes to higher electricity expenses (EPA). Shade trees and cool roofs can reduce the energy needed to cool buildings (EPA). Confirm any question about your own bill with your electric utility.
Heat islands are urbanized areas that experience higher temperatures than outlying areas (EPA). This page explains what the U.S. Environmental Protection Agency reports about heat islands and electricity use. It also shows where those statements stop, so you can tell general findings from anything specific to your own home.
What a heat island is
Heat islands are urbanized areas that experience higher temperatures than outlying areas (EPA). Structures such as buildings, roads and other infrastructure absorb and re-emit the sun's heat more than natural landscapes do (EPA).
Conventional roofing and pavement tend to reflect less solar energy than trees and vegetation (EPA). Hard, dry surfaces in urban areas provide less shade and moisture than natural landscapes, and therefore contribute to higher temperatures (EPA).
Conventional human-made materials used in urban environments tend to absorb and emit more of the sun's heat than trees, vegetation and other natural surfaces (EPA).
On a warm day, conventional roofing materials may reach as much as 66°F warmer than surrounding air temperatures (EPA).
Why heat islands raise cooling demand
Heat islands increase electricity demand for air conditioning and peak energy demand (EPA). Peak demand generally occurs on exceptionally hot afternoons, when homes run air-conditioning systems, lights and appliances (EPA).
Vehicles, air-conditioning units, buildings, and industrial facilities all emit heat into the urban environment (EPA).
Heat islands can form during the day or night, in small or large cities, in suburban areas, in northern or southern climates, and in any season (EPA). Research predicts that the heat island effect will strengthen as urban areas change and grow (EPA).
How much hotter urban areas can be
A review of research studies and data found that in the United States, daytime urban temperatures are about 1 to 7 °F higher than outlying areas (EPA). Nighttime temperatures in urban areas are about 2 to 5 °F higher than outlying areas (EPA).
Humid regions, primarily in the eastern United States, and cities with larger, denser populations experience the greatest temperature differences (EPA). Heat islands are usually measured by the temperature difference between cities and the surrounding areas (EPA).
Compare the figures above with what your own neighborhood records show before drawing a conclusion.
Peak demand and higher electricity expenses
Heat islands increase electricity demand for air conditioning and peak energy demand (EPA). This increased demand contributes to higher electricity expenses (EPA).
Increased demand can overload systems and require a utility to institute controlled brownouts or blackouts (EPA). Heat islands can affect communities by increasing summertime peak energy demand and air conditioning costs (EPA).
Your own bills show your actual costs. Read them with your electric utility if you have questions about a charge.
Trees, water and surfaces
Trees, vegetation and water bodies tend to cool the air by providing shade, transpiring water from plant leaves, and evaporating surface water (EPA).
Strategies such as planting shade trees can lower surface and air temperatures in cities (EPA).
Heat island cooling strategies offer other important benefits to communities, including energy savings (EPA).
Cool roofs and energy use
Buildings with cool roofs use less air conditioning, save energy, and have more comfortable indoor temperatures (EPA). A cool roof lowers the amount of heat transferred to the building, which allows it to use less energy for air conditioning (EPA).
Because cool roofs reflect sunlight, they may increase energy use in buildings during winter months in cold climates (EPA). The winter heating penalty of a cool roof is typically offset by summer cooling energy savings (EPA).
To maximize the energy savings of cool roofs, building owners should consider implementing energy efficiency improvements such as insulation and air sealing (EPA). Cool roof programs are typically managed by utilities and energy providers, state and local governments, and non-profit organizations (EPA). Ask your electric utility whether a program applies to your home.
Ask a licensed contractor to check your attic insulation before you compare roofing products.
What reduces heat island effects
Heat island reduction strategies lessen electricity demand for air conditioning and reduce greenhouse gas emissions associated with electricity generation (EPA). Planting shade trees or installing cool roofs can lower surface and air temperatures in cities (EPA).
The same strategies can reduce the amount of energy needed to cool buildings, which can improve the reliability of the electric system during extreme weather (EPA). Use these findings as a starting point for your own questions, not as a promise about your roof or your bill.
Frequently asked
Do heat islands raise electricity demand?
Heat islands increase electricity demand for air conditioning and peak energy demand (EPA). This increased demand contributes to higher electricity expenses (EPA). Peak demand generally occurs on exceptionally hot afternoons, when homes run air-conditioning systems, lights and appliances (EPA).
How hot can a roof get on a warm day?
On a warm day, conventional roofing materials may reach as much as 66°F warmer than surrounding air temperatures (EPA).
Do cool roofs lower air conditioning use?
Buildings with cool roofs use less air conditioning, save energy, and have more comfortable indoor temperatures (EPA). Check the product data and ask a licensed contractor how the roof will be installed.
Where are heat island effects strongest?
Humid regions, primarily in the eastern United States, and cities with larger, denser populations experience the greatest temperature differences (EPA). Heat islands can form in small or large cities and in any season (EPA).
Can trees help with heat islands?
Trees, vegetation and water bodies tend to cool the air by providing shade, transpiring water from plant leaves, and evaporating surface water (EPA). Planting shade trees can lower surface and air temperatures in cities (EPA). Heat island cooling strategies offer other important benefits to communities, including energy savings (EPA).
Does air conditioning add heat to cities?
Vehicles, air-conditioning units, buildings, and industrial facilities all emit heat into the urban environment (EPA). These sources can contribute to heat island effects (EPA). Heat islands can form during the day or night, in small or large cities, and in any season (EPA).
Related
- Three strategies to improve indoor air quality
- Stoves, heaters and fireplaces: indoor air
- Cool roofs and air conditioning load in Florida
Need an HVAC check on the air conditioner in your Tampa Bay home? Blume Mechanical Service (license CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: U.S. Environmental Protection Agency — What Are Heat Islands? (https://www.epa.gov/heatislands/what-are-heat-islands) · U.S. Environmental Protection Agency — Learn About Heat Island Effects (https://www.epa.gov/heatislands/learn-about-heat-island-effects) · U.S. Environmental Protection Agency — Heat Island Trends (https://www.epa.gov/heatislands/heat-island-trends) · U.S. Environmental Protection Agency — Guide to Reducing Heat Islands (https://www.epa.gov/heatislands/guide-reducing-heat-islands) · U.S. Environmental Protection Agency — Frequent Heat Island Questions and Resources (https://www.epa.gov/heatislands/frequent-heat-island-questions-and-resources) · U.S. Environmental Protection Agency — Using Cool Roofs to Reduce Heat Islands (https://www.epa.gov/heatislands/using-cool-roofs-reduce-heat-islands)