HVAC, explained
What a furnace inspection includes
A technician's inspection of a gas or oil furnace should check the gas connections, gas pressure, burner combustion and heat exchanger (ENERGY STAR). The CPSC urges a yearly professional inspection of fuel-burning home heating systems, including furnaces (CPSC). The sections below group the checks by part of the system.
Public agencies describe what a technician should check on a furnace. Each point below names the agency that published it. Use the list to understand the scope of a professional visit, and check your unit's nameplate and manual for the steps your model needs.
How often a professional should inspect a furnace
The CPSC urges consumers to schedule a yearly professional inspection of all fuel-burning home heating systems, including furnaces (CPSC). The EPA advises having a trained professional inspect, clean and tune up central heating systems, including furnaces, flues and chimneys, annually (EPA). The DOE advises that a furnace or heat pump receive professional maintenance each year (DOE).
ENERGY STAR advises annual pre-season check-ups by a contractor to keep heating and cooling systems at peak performance (ENERGY STAR). Its maintenance checklist also says a typical maintenance check-up should include the checks listed there (ENERGY STAR). An Illinois Extension winter checklist says getting a furnace checked by a technician now could save you from an emergency when it's really cold outside (University of Illinois Extension). Ask the technician which of those checks the visit covers.
Gas connections, gas pressure and burner combustion
For gas or oil heating equipment, ENERGY STAR's checklist says a technician should check all gas or oil connections, gas pressure, burner combustion and the heat exchanger (ENERGY STAR). ENERGY STAR says a dirty burner or a cracked heat exchanger causes improper burner operation (ENERGY STAR).
ENERGY STAR also says improperly operating gas or oil connections are a fire hazard and can contribute to health problems (ENERGY STAR). The EPA says it is most important that combustion equipment is maintained and properly adjusted (EPA).
The EPA advises strictly following all service and maintenance procedures the manufacturer recommends (EPA). Ask the manufacturer for the procedures that apply to your model.
Flues, chimneys and vents
The EPA says flues and chimneys should be connected, in good condition and not blocked (EPA). It also says blocked, leaking or damaged chimneys or flues release harmful combustion gases and particles (EPA). The CDC tells households to make sure gas appliances are vented properly (CDC).
The University of Missouri Extension says chimneys, flues and flashing should be inspected each fall for loose bricks and mortar, cracked linings and leaks (University of Missouri Extension). That wording suits masonry chimneys, so confirm with your technician which parts apply to your home.
Blower, controls and the starting cycle
ENERGY STAR's checklist lists cleaning and adjusting the blower components to provide proper system airflow (ENERGY STAR). The same checklist says a technician should check the system controls to ensure proper and safe operation (ENERGY STAR).
It also says a technician should check the starting cycle to assure the system starts, operates and shuts off properly (ENERGY STAR).
Filters, dirt and neglect
ENERGY STAR says to inspect, clean or change air filters once a month in a central air conditioner, furnace or heat pump (ENERGY STAR). The University of Missouri Extension advises checking furnace filters every two months during the heating season, and cleaning or replacing them as needed (University of Missouri Extension). The two intervals differ, so follow the schedule in your unit's manual or the one your technician gives you.
The DOE says to check the maintenance requirements of a furnace to determine whether its filters can be cleaned and reused (DOE). ENERGY STAR says a dirty filter can increase energy costs and damage your equipment, leading to early failure (ENERGY STAR). A dirty filter slows air flow, making the system work harder, which wastes energy (ENERGY STAR).
ENERGY STAR says dirt and neglect are the top causes of heating and cooling system failure and inefficiency (ENERGY STAR). The DOE says poorly maintained systems and appliances must work harder to perform their functions (DOE). The EPA says proper maintenance is important even for new furnaces, because they can also corrode and leak combustion gases (EPA).
Ducts and the area around the furnace
The University of Missouri Extension advises keeping the area around the furnace housing free of dust, lint and litter (University of Missouri Extension). It also advises inspecting heating ducts annually for leaks and repairing them (University of Missouri Extension).
Carbon monoxide alarms
The EPA says preventing carbon monoxide in the home is better than relying on an alarm (EPA). CO alarms are designed to warn you of any unusual build-up of CO in your home (EPA). The EPA advises installing a CO alarm in the hallway near every separate sleeping area (EPA).
Who should do the inspection
The EPA advises households that suspect combustion appliances are affecting their health to contact qualified appliance service people to have appliances inspected and adjusted if needed (EPA). The EPA says a homeowner can find a qualified person by asking the appliance distributor or the fuel supplier (EPA). In some areas, the local fuel company may be able to inspect and adjust the appliance (EPA).
Ask any service company what its visit covers, and compare the answer with the checks above.
Frequently asked
How often should a furnace be professionally inspected?
The CPSC urges a yearly professional inspection of fuel-burning home heating systems, including furnaces (CPSC). The DOE advises that a furnace or heat pump receive professional maintenance each year (DOE).
Is a yearly tune-up required?
ENERGY STAR says to consider a yearly professional tune-up of your HVAC system (ENERGY STAR). That is a recommendation to consider, not a requirement.
What does a technician check on the burner?
ENERGY STAR's checklist says a technician should check burner combustion (ENERGY STAR). ENERGY STAR says a dirty burner or a cracked heat exchanger causes improper burner operation (ENERGY STAR).
Does the inspection cover the controls?
ENERGY STAR's checklist says a technician should check the system controls to ensure proper and safe operation (ENERGY STAR).
How often should the furnace filter be changed?
ENERGY STAR says to inspect, clean or change air filters once a month in a central air conditioner, furnace or heat pump (ENERGY STAR). The University of Missouri Extension advises checking furnace filters every two months during the heating season (University of Missouri Extension).
Who can inspect a furnace?
The EPA says a homeowner can find a qualified person by asking the appliance distributor or the fuel supplier (EPA). In some areas, the local fuel company may be able to inspect and adjust the appliance (EPA).
Related
- Gas furnace maintenance: CO safety and yearly service
- Radon and HVAC in Florida homes: what to know
- Heating Tune-Up: What It Covers and What to Leave to a Pro
Need a furnace inspection in Pinellas, Hillsborough or Pasco county? Blume Mechanical Service (license CAC-1822618) repairs, installs and maintains HVAC equipment and is brand-agnostic. Call 727-330-9131.
Sources: CPSC — Home Heating Equipment (https://www.cpsc.gov/Safety-Education/Safety-Education-Centers/Carbon-Monoxide-Information-Center/Home-Heating-Equipment) · DOE — Home Energy Checklist (https://www.energy.gov/cmei/femp/home-energy-checklist) · DOE — Six Simple Steps To Save Energy and Money This Winter (https://www.energy.gov/indianenergy/articles/six-simple-steps-save-energy-and-money-winter) · ENERGY STAR — Maintenance Checklist (https://www.energystar.gov/saveathome/heating-cooling/maintenance-checklist) · ENERGY STAR — Save on Heating Costs with ENERGY STAR This Season (https://www.energystar.gov/products/save-heating-costs-energy-star-season) · ENERGY STAR — Clean Heating and Cooling (https://www.energystar.gov/products/energy_star_home_upgrade/clean_heating_cooling) · EPA — Carbon Monoxide's Impact on Indoor Air Quality (https://www.epa.gov/indoor-air-quality-iaq/carbon-monoxides-impact-indoor-air-quality) · EPA — Sources of Combustion Products (https://www.epa.gov/indoor-air-quality-iaq/sources-combustion-products) · EPA — Protect Your Family and Yourself from Carbon Monoxide Poisoning (https://www.epa.gov/indoor-air-quality-iaq/protect-your-family-and-yourself-carbon-monoxide-poisoning) · EPA — What do I do if I suspect that combustion appliances are affecting my health? (https://www.epa.gov/indoor-air-quality-iaq/what-do-i-do-if-i-suspect-combustion-appliances-are-affecting-my-health) · EPA — What about carbon monoxide detectors? (https://www.epa.gov/indoor-air-quality-iaq/what-about-carbon-monoxide-detectors) · CDC — Carbon Monoxide (CO) Poisoning Basics (https://www.cdc.gov/carbon-monoxide/about/index.html) · University of Missouri Extension — Heating System Maintenance | MU Extension (https://extension.missouri.edu/publications/gh5981) · University of Illinois Extension — Winterize your home: winter weather checklist (https://extension.illinois.edu/blogs/plan-well-retire-well/2020-12-03-winterize-your-home-winter-weather-checklist)