Blume Mechanical ServiceBlumeMechanical Service

HVAC, explained

Boiler vs furnace: efficiency, age and upkeep

ENERGY STAR rates heating equipment with AFUE, the measure of heating equipment efficiency (ENERGY STAR). Certified gas boilers have AFUE ratings of 90 percent or more, and certified oil boilers have 87 percent or more (ENERGY STAR, read November 2026). ENERGY STAR says a qualified furnace is 15 percent more efficient than a conventional furnace (ENERGY STAR, read November 2026). Duct condition matters too, because ducts moving air to and from a forced air furnace are often big energy wasters (ENERGY STAR).

ENERGY STAR publishes separate efficiency ratings for boilers and furnaces (ENERGY STAR). This page covers what ENERGY STAR and the U.S. Energy Information Administration report about efficiency, age, upkeep, ducts and fuel use. Each figure is cited to its source.

How ENERGY STAR rates heating equipment

ENERGY STAR uses annual fuel utilization efficiency, called AFUE, to rate heating equipment (ENERGY STAR). The program describes AFUE as the measure of heating equipment efficiency (ENERGY STAR).

The ratings below apply to certified models, so check for the label before you compare one unit with another. ENERGY STAR certified boilers have AFUE ratings of 87 percent or greater for oil and 90 percent or greater for gas (ENERGY STAR, read November 2026).

Boiler efficiency ratings

ENERGY STAR certified gas boilers have AFUE ratings of 90 percent or more (ENERGY STAR, read November 2026).

That rating is approximately 6 percent more efficient than the federal standard (ENERGY STAR, read November 2026).

ENERGY STAR certified oil boilers have AFUE ratings of 87 percent, approximately 1 percent more efficient than the federal standard (ENERGY STAR, read November 2026).

The current ENERGY STAR boiler specification is effective as of January 2024 (ENERGY STAR).

If you have a boiler, ENERGY STAR suggests considering a certified boiler that is 5 percent more efficient than a new, standard model (ENERGY STAR, read November 2026).

Furnace ratings and blower motors

ENERGY STAR certified furnaces have higher AFUE ratings and higher efficiency blower motors than standard models (ENERGY STAR).

ENERGY STAR says a qualified furnace is 15 percent more efficient than a conventional furnace (ENERGY STAR, read November 2026).

Certified oil furnaces are up to 4 percent more energy efficient than baseline models (ENERGY STAR, read November 2026).

ENERGY STAR furnaces were first qualified for its label in April 1995 (ENERGY STAR).

Ducts and forced air systems

ENERGY STAR notes that ducts moving air to and from a forced air furnace, central air conditioner or heat pump are often big energy wasters (ENERGY STAR).

In a typical house, about 20 to 30 percent of the air moving through the duct system is lost to leaks and poor connections (ENERGY STAR, read November 2026).

Sealing and insulating ducts can improve heating and cooling efficiency by as much as 20 percent (ENERGY STAR, read November 2026).

Because ducts are often concealed in walls, ceilings, attics and basements, repairing them can be difficult (ENERGY STAR).

Most heating and cooling equipment contractors also repair ductwork (ENERGY STAR).

Upkeep that affects efficiency

ENERGY STAR advises regular maintenance of heating and cooling systems to prevent future problems and unwanted costs (ENERGY STAR).

The program suggests annual pre-season check-ups by a contractor to keep a system at peak performance (ENERGY STAR).

Airflow problems can reduce a system's efficiency by up to 15 percent (ENERGY STAR, read November 2026).

Inspect, clean or change air filters once a month in a central air conditioner, furnace or heat pump (ENERGY STAR).

Work on gas connections, burners and heat exchangers belongs with a licensed contractor, not with the homeowner.

Cost and the up-front price

ENERGY STAR says that certified products can cost more up front, but the cost difference is paid back over time through lower energy bills (ENERGY STAR).

ENERGY STAR advises checking around for available rebates on certified heating and cooling equipment (ENERGY STAR).

The program says contractors should be able to show calculations of savings for certified heating and cooling equipment (ENERGY STAR).

Confirm any rebate or tax credit with your electric utility, the IRS or a tax professional before you rely on it.

How homes use heating fuels

ENERGY STAR says heating and cooling are a large share of the energy used in your home.

In 2020, more than half of a household's annual energy use went to space heating and air conditioning (EIA).

In 2020, approximately 13 percent of households used a heat pump as their main heating equipment (EIA).

Heating oil is primarily used in the Northeast (EIA).

Wood is used as a main heating fuel mostly in rural areas, but many homes throughout the country use it for supplemental heating (EIA).

Checking your system before you choose

If a furnace or boiler is more than 15 years old, ENERGY STAR lists that age as a sign to consider replacement (ENERGY STAR).

A bigger system is not always better, and ENERGY STAR says a contractor should size the system from the house, its insulation and its windows (ENERGY STAR).

Check the nameplate or the equipment manual for the fuel type and model of your current unit before you compare it with another.

Ask a licensed contractor to confirm the system type and whether a replacement carries the ENERGY STAR label.

Frequently asked

Is a boiler more efficient than a furnace?

ENERGY STAR publishes separate efficiency figures for boilers and for furnaces, so compare each unit with its own type (ENERGY STAR).

What AFUE rating does an ENERGY STAR gas boiler have?

ENERGY STAR certified gas boilers have AFUE ratings of 90 percent or more (ENERGY STAR, read November 2026). Certified oil boilers have AFUE ratings of 87 percent or more (ENERGY STAR, read November 2026).

When is a furnace or boiler old enough to replace?

ENERGY STAR lists a furnace or boiler more than 15 years old as a sign to consider replacement (ENERGY STAR).

How often should filters be changed?

ENERGY STAR advises inspecting, cleaning or changing air filters once a month (ENERGY STAR). Airflow problems can reduce a system's efficiency by up to 15 percent (ENERGY STAR, read November 2026).

Do ducts affect a furnace's performance?

ENERGY STAR says ducts that move air to and from a forced air furnace are often big energy wasters (ENERGY STAR). Sealing and insulating ducts can improve heating and cooling efficiency by as much as 20 percent (ENERGY STAR, read November 2026).

Where is heating oil used most?

Heating oil is primarily used in the Northeast (EIA).

Related

Need a heating check in Pinellas, Hillsborough or Pasco County? Blume Mechanical Service (license CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment, brand-agnostic. Call 727-330-9131.

Sources: ENERGY STAR (U.S. EPA and DOE) — Boilers (https://www.energystar.gov/products/boilers) · ENERGY STAR (U.S. EPA and DOE) — Furnaces (https://www.energystar.gov/products/furnaces) · ENERGY STAR (U.S. EPA and DOE) — When is it time to replace? (https://www.energystar.gov/saveathome/heating-cooling/replace) · ENERGY STAR (U.S. EPA and DOE) — Maintenance Checklist (https://www.energystar.gov/saveathome/heating-cooling/maintenance-checklist) · ENERGY STAR (U.S. EPA and DOE) — Duct Sealing (https://www.energystar.gov/saveathome/heating-cooling/duct-sealing) · ENERGY STAR (U.S. EPA and DOE) — 10 Tips for Hiring a Heating and Cooling Contractor (https://www.energystar.gov/saveathome/heating-cooling/10-tips-hiring) · ENERGY STAR (U.S. EPA and DOE) — Heat & Cool Efficiently (https://www.energystar.gov/saveathome/heating-cooling) · U.S. Energy Information Administration (EIA) — Use of energy in homes (https://www.eia.gov/energyexplained/use-of-energy/homes.php)

Search Google for difference between a boiler and a furnace