HVAC, explained
Backdraft and Trapped Pollutants After Sealing
Sealing a home may trap indoor air pollutants such as carbon monoxide, radon and VOCs (ENERGY STAR). ENERGY STAR says that in some cases sealing can cause naturally venting combustion appliances to back-draft gases into the home (ENERGY STAR). EPA recommends a radon test kit after reducing air leaks (EPA).
Sealing changes how air moves through a house, and ENERGY STAR and EPA name several risks that come with it. This page covers trapped indoor pollutants, combustion appliances that can back-draft, radon testing, moisture signs in the attic, and the safety steps the pages describe near the furnace flue and pipes.
Trapped pollutants after sealing
Sealing your home may trap indoor air pollutants such as carbon monoxide, radon and volatile organic compounds (VOCs) and create unsafe conditions (ENERGY STAR). The basement and crawlspace page gives the same warning (ENERGY STAR).
Addressing this properly may require additional ventilation fans to maintain safe air quality in the home (ENERGY STAR). ENERGY STAR also says repairs may be needed to reduce or eliminate the sources of indoor air pollutants (ENERGY STAR).
Backdrafting combustion appliances
ENERGY STAR says that in some cases sealing can cause naturally venting combustion appliances to back-draft gases back into the home, creating unsafe conditions (ENERGY STAR). The basement and crawlspace page describes the same risk (ENERGY STAR).
For an appliance that uses oil or gas, ENERGY STAR suggests considering a Home Performance Contractor to test it (ENERGY STAR). The test checks that the appliance is properly drafting combustion gases before and after sealing (ENERGY STAR).
For the HVAC side of the house, Blume Mechanical Service repairs, installs and maintains HVAC and refrigeration equipment.
Radon testing after sealing
After reducing air leaks, EPA recommends getting a test kit to check the radon levels in your home (EPA). Radon is listed with carbon monoxide and VOCs as an indoor air pollutant that sealing may trap (ENERGY STAR).
For a home in a high radon area, ENERGY STAR says to consider contacting a contractor to conduct a radon test and install radon mitigation systems before sealing (ENERGY STAR).
Moisture signs and attic vents
ENERGY STAR lists kitchen, bathroom and clothes dryer vents that exhaust moist air directly into the attic space instead of outdoors as a problem (ENERGY STAR). Moldy or rotted attic rafters or floor joists indicate moisture problems (ENERGY STAR).
Attic air sealing is generally a challenging DIY project, but ENERGY STAR says the benefits can be substantial (ENERGY STAR). Before sealing, ENERGY STAR says to push back the insulation and scoop it out of the soffits (ENERGY STAR).
Furnace flues and insulation dams
ENERGY STAR cautions that furnace flues, the pipes that remove furnace exhaust, can be very hot (ENERGY STAR).
Before the insulation goes back, ENERGY STAR says to build a metal dam to keep it away from the pipe (ENERGY STAR). The same page says to form an insulation dam to prevent insulation from contacting the flue pipe (ENERGY STAR).
Sealing around pipes and wires
ENERGY STAR says to use expanding foam or caulk to seal the openings around plumbing vent pipes and electrical wires (ENERGY STAR).
If the space around a plumbing pipe is wider than 3 inches, ENERGY STAR says fiberglass insulation may be needed as a backer for the expanding foam (ENERGY STAR). Once the areas are sealed, ENERGY STAR says to push the insulation back into place (ENERGY STAR).
Basement and crawlspace sealing
The basement and crawlspace page warns that sealing can trap carbon monoxide, radon and VOCs (ENERGY STAR). It also says properly addressing this may require additional ventilation fans and repairs to reduce or eliminate the sources of pollutants (ENERGY STAR).
The same page describes the risk that sealing in some cases can backdraft combustion gases (ENERGY STAR). ENERGY STAR suggests considering a Home Performance Contractor to test oil and gas appliances before and after sealing (ENERGY STAR).
Frequently asked
Can sealing trap carbon monoxide in a home?
ENERGY STAR says sealing a home may trap indoor air pollutants such as carbon monoxide, radon and VOCs and create unsafe conditions (ENERGY STAR). ENERGY STAR says addressing this may require additional ventilation fans to maintain safe air quality (ENERGY STAR).
What does back-drafting mean?
ENERGY STAR says that in some cases sealing can cause naturally venting combustion appliances to back-draft gases back into the home (ENERGY STAR). The page says this applies in some cases, not in every home (ENERGY STAR).
Should I test for radon after sealing?
EPA recommends getting a test kit to check the radon levels in your home after reducing air leaks (EPA). In a high radon area, ENERGY STAR says to consider a contractor test before sealing (ENERGY STAR).
Will I need extra ventilation after sealing?
ENERGY STAR says addressing trapped pollutants may require additional ventilation fans to maintain safe air quality (ENERGY STAR). ENERGY STAR says repairs may be needed to reduce or eliminate the sources of indoor air pollutants (ENERGY STAR).
Are furnace flues hot?
ENERGY STAR cautions that furnace flues, the pipes that remove furnace exhaust, can be very hot (ENERGY STAR). ENERGY STAR says to build a metal dam to keep the insulation away from the pipe (ENERGY STAR).
Who can test an oil or gas appliance?
ENERGY STAR suggests considering a Home Performance Contractor to test oil or gas appliances before and after sealing (ENERGY STAR). ENERGY STAR says the test checks that the appliance is drafting combustion gases properly before and after sealing (ENERGY STAR).
Related
- Do Heat Pumps Filter Fine Particles at Home?
- Carbon monoxide symptoms and what to do
- Indoor Air Quality at Home: How to Monitor It and How to Improve It
Sealing changed the airflow in your Florida home? Blume Mechanical Service (CAC-1822618) repairs, installs and maintains HVAC and refrigeration equipment in Pinellas, Hillsborough and Pasco counties. Call 727-330-9131.
Sources: ENERGY STAR — Attic Air Sealing Project (https://www.energystar.gov/saveathome/seal_insulate/attic-air-sealing-project) · ENERGY STAR — Basement & Crawlspace Air Sealing and Insulating Project (https://www.energystar.gov/saveathome/seal_insulate/basement_crawlspace) · EPA — radon test recommendation as quoted on the ENERGY STAR Attic Air Sealing Project (https://www.energystar.gov/saveathome/seal_insulate/attic-air-sealing-project)